_Protoxide._ This may be obtained in solution with muriatic acid as above, from the native oxide. Or the black oxide may be mixed with sulphuric acid into a paste, and heated in an iron spoon to redness; the mass being lixiviated, a solution of the protoxide in sulphuric acid is obtained, generally with a slight excess of the acid; in this process heat and the presence of sulphuric acid, expels the redundant oxygen of the black oxide, and reduce it to the protoxide, which hence becomes soluble. If in either of these solutions any oxide of iron be present, whether from the manganese, or acquired during the manipulation, it is easily discovered and separated, as I have frequently found. Into any solution containing a mixture of the oxides of manganese, the green oxide of iron, and the red oxide of iron, let lime water be gradually poured; the red oxide of iron will be first precipitated, next the green oxide, and lastly the oxide of manganese, which may hence be separated from each other. Iron may also be discovered and separated by carbonate of potash, which must be dropped into the solution as long as any coloured precipitate appears; as soon as it has subsided, the snow-white carbonate of manganese succeeds. This white carbonate may be very conveniently used for obtaining solutions of pure manganese in any of the acids. When a solution of pure manganese is treated with lime water, or ammonia, a light buff oxide, not much differing in appearance from the yellow oxide of iron, is obtained. This oxide is soluble in all acids, when recently precipitated; but, such is its avidity for oxygen, with moderate agitation of the liquid it acquires oxygen and becomes brown, when it ceases to be totally soluble; if dried in the air quickly, it becomes brown and obtains considerable oxygen. The buff oxide recently precipitated, is probably a hydrate; for, when the white carbonate of manganese is heated gradually to red, the water and the acid are both expelled, and a grey powder remains; this is quite black on the surface of the mass, if exposed to the air during the process. Probably this grey powder is the pure protoxide; it is soluble in acids, except the black powder at the surface; perhaps but for the oxygen of the air, the protoxide would be nearly white.