A Text-book of Paper-makingCross, C. F. (Charles Frederick)
Science
A Text-book of Paper-making
Cross, C. F. (Charles Frederick)
Paper industry; Papermaking
The alkali employed may be either caustic lime, caustic {83} soda,
sodium carbonate, or a mixture of the latter and lime, which is of
course equivalent to using caustic soda. The proportion of alkali
depends upon so many considerations that it is quite impossible to
give exact information on this point. In the case of caustic soda, a
quantity equal to from 5–10 per cent. on the rags may be taken to be
a fair average. If lime be used it should be slaked with water, made
into a thin milk and carefully filtered through fine wire cloth to keep
back the particles of sand, coal, &c., which lime is always liable to
contain. From 5–10 per cent. may be used. The amount of lime actually
dissolved in the water is relatively small (1·3 grms. per litre);
the portion in solution however, rapidly combines with the grease,
dirt, and colouring matter of the rags and forms with them insoluble
compounds, a fresh portion of lime being at the same time dissolved.
This formation of insoluble compounds constitutes an important
objection to the use of lime, as they are liable {84} to remain to
some extent fixed in the rags and are with great difficulty removed
by washing. For this reason, therefore, the more soluble alkali is to
be preferred. Moreover, the lime sometimes tends to exert a hardening
effect upon the cellulose. Notwithstanding these objections, lime is
used by some paper-makers in preference to soda. In making choice of
the chemical for boiling, much depends on the quality of the rags
and the nature of the paper for which they are intended, so that no
definite rules can be given.
The time of boiling varies from 2 to 6 hours, according to the quality
of rags, the chemical employed, and the pressure. The use of very high
pressures should be avoided as far as possible, as there is a danger,
owing to the correspondingly high temperature, of _fixing_ the dirt and
colouring matters instead of dissolving them.
The quantity of water should be kept as low as may be, in order to have
as strong a solution of alkali as possible; this effects a saving both
in the time of boiling, and in the alkali. This is of great importance
where it is necessary to evaporate the whole of the waste liquors. It
should also be remembered that a certain amount of water is always
formed by condensation in all boilers in which live steam is used. On
the other hand, if too little water be added, the rags are liable to
become “burned” and the fibre therefore weakened. During the operation
the boiler should be made to revolve slowly, in order to produce
thorough circulation of the liquor.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account