Ancient and Modern Ships, Part 1: Wooden Sailing ShipsHolmes, George Charles Vincent, Sir
History
Ancient and Modern Ships, Part 1: Wooden Sailing Ships
Holmes, George Charles Vincent, Sir
Sailing ships -- History; Shipbuilding -- History; Ships -- History
The rudder was worked
by means of a tiller fitted into the socket at the upper end.
Unfortunately, the two extreme ends of the ship have decayed away, so
that it is not possible to determine with accuracy what was the
appearance of the bow and stern. It is, however, probable, from the
direction taken by the planking towards the ends, that the vessel
possessed very considerable sheer. As may be seen from the plan, the
character of the lines was extremely fine, and it is probable that the
boat was capable of high speed. The remains of the ropes which have been
discovered prove that they were made from the bark of trees.
This vessel may be considered as a connecting link between the ancient
and mediaeval types of ships. Her proportions and scantlings prove that
her builders had a large experience of shipbuilding, that they fully
understood how to work their material and to adapt it properly to the
duty it had to fulfil, and also that they understood the art, which was
subsequently lost, to be revived only in modern times, of shaping the
underwater portion of the hull so as to reduce the resistance to the
passage of the vessel through the water. The only part of the structural
design to which any serious exception can be taken is the very slight
character of the connection between the top sides and the body of the
boat, and even this defect was probably not very serious when we take
into account the lightness of the loading, and the fact that it probably
consisted chiefly of live cargo, so that there was little dead weight to
cause serious straining.
Vessels of the type of the Viking ships were built in Denmark at a very
early date. In 1865 three boats were discovered buried in a peat bog in
Jutland. Danish antiquaries consider that they were built about the
fifth century of our era. The largest is 70 ft. in length and of such an
excellent type that boats of somewhat similar form and construction are
in universal use to this day all round the coasts of Norway. Such an
instance of persistency in type is without parallel in the history of
shipbuilding, and is a wonderful proof of the skill of the Norsemen in
designing and building vessels. The boat in question is clinker-built,
the planks having the same peculiarities as those of the Viking ship
just described. It is of the same shape at both ends, and has great
sheer at both stem and stern. The rowlocks, of which there are thirty,
prove that the vessel was intended to be rowed in either direction. This
also is a peculiarity of the modern Norwegian rowboat. The steering was
effected by means of a large oar, or paddle. There is no trace of a
mast, nor of any fitting to receive one; nor was the vessel decked. The
internal framing was admirably contrived. In fact, it would be
difficult, even at the present time, to find a vessel in which lightness
and strength were better combined than in this fifteen-hundred-year-old
specimen of the shipbuilder's art.
CHAPTER IV.
MEDIAEVAL SHIPS.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account