It is to be remembered that Faust was a member of a family of
goldsmiths, and that in their business, punches, dies, and moulds,
would be in frequent use. And although the goldsmith’s art, as all
other arts then were, would be conducted as a mystery, to which none
but the regularly initiated had access, Schœffer, in the opportunities
for intimacy with Faust which his position afforded him, could
hardly fail, sooner or later, to observe such appliances. These once
observed,--and opportunities for observation, in his capacity of
illuminator (an art in which gold and silver were sometimes largely
used) would not be wanting, especially when eagerly watched and waited
for,--he would not rest until he had ascertained the uses to which they
were put; and that information gained, the practical application would
quickly follow. The punches he needed were ready to his hand. Each
letter then in use, made of hard cut metal,[71] was, in fact, a punch.
To strike a matrix in a softer metal, or in clay or plaster, which
could be subsequently hardened, and to adapt a mould to cast a type
with a shank or body of uniform height and accurately squared, were the
two steps that were required. The mould would be his chief difficulty.
This he had to devise so that it could be adjusted to the varying
widths of the different letters and characters required for a complete
fount[72] of types; and this could scarcely be effected otherwise than
by making it in corresponding halves, with a provision for leaving in
their centre, when closed together, a small quadrangular channel or
chamber, made of hard metal, the width of which could be regulated by
a slide and screw. The stamped part of the matrix placed at the end of
this channel, would form the bottom of the mould; and when this was
fixed, it would be ready for the pouring in of the fused metal, which
setting almost instantly, a quick and slight opening of the halves
of the mould, enabled the operator to shake out the cast type. The
type-founder could thus rapidly repeat the process until he had cast
as many letters as he required. A little careful trimming and dressing
was all that was further needed on his part before he handed them over
to the printer ready for use. No doubt it required much thought, and
many experiments, before the mould was finished to the satisfaction of
its inventor. But as soon as it was completed, the Type-founder’s art
commenced.
From the foregoing considerations it becomes apparent that as Faust
found money to enable Gutenberg fully to realise his ideas as to
Letter-press printing, so in all likelihood did the business which
was the source of Faust’s wealth, furnish to Schœffer the clue which
enabled him to complete the invention, without which Typography
could never have achieved the results that were effected by it with
such marvellous rapidity within the lifetime of those by whom it was
invented.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account