We illustrate below a dredger of simple construction, well calculated for doing useful work on shallow streams. The barge is 54 ft. long, 22 ft. beam, and 6 ft. deep. Her draught of water is under 4 ft. Built by Rose, Downs & Thompson Hull. Our drawing explains itself. It will be seen that we have here a swiveling crane and grab bucket, and that the stuff dredged can be loaded into the barge and conveyed where necessary. The lifting power of the crane is one ton, and in suitable material such a dredger can get through a great deal of work in a comparatively short time.--_Engineer_. [Illustration: IMPROVED ONE-TON BUCKET DREDGER.] * * * * * HISTORY OF THE FIRE EXTINGUISHER. The first fire extinguishers were of the "annihilator" pattern, so arranged in a building that when a fire occurred carbonic acid gas was evolved, and, if the conditions were right (as the mediums say), the fire was put out. It worked very nicely at experimental fires built for the purpose, but was apt to fail in case of an involuntary conflagration. About the year 1867 a patent was granted to Carlier and Vignon, of France, for an apparatus in which water saturated with carbonic acid gas was projected upon the fire by the expansive force of the gas itself. As the apparatus was portable and the stream could be directed to any point, it was obviously the desideratum needed. Mr. D. Miles, of Boston, purchased the American patent, and subsequently sold the territory, exclusive of New England, to the Babcock Co., who, at the time, had a crude apparatus of their own. The first machines sold under the new patent were filled with water and loaded with cartridges of dry acid and bicarbonate of soda--the cap screwed down hastily, and, as the chemicals dissolved, the gas was generated, the pressure raised, and the water charged by absorption. The pressure of some 80 pounds was sufficient to project a stream 50 feet or more, and the machine was set upon the shelf so as to be ready for any fire that might occur. In many cases, however, the pressure escaped after a short time, and the machine when needed was found to be useless. The most important step in the evolution of the modern extinguisher was the adoption of a device for mixing liquid acid with the soda solution, by the turning of a handle or screw, _after_ the alarm was given. This was a practical machine, and proved of such value that an immense business was built up. The result of this prosperity was the development of new companies with new devices for accomplishing the same result, which were successfully offered to the public with varying success.