A History of the Growth of the Steam-EngineThurston, Robert Henry
History
A History of the Growth of the Steam-Engine
Thurston, Robert Henry
Steam-engines -- History
The pipe _h_ is used for the purpose of keeping the upper side of the
piston covered with water, to prevent air-leaks--a device of Newcomen.
Two gauge-cocks, _c c_, and a safety-valve, _N_, are represented in
the figure, but it will be noticed that the latter is quite different
from the now usual form. Here, the pressure used was hardly greater
than that of the atmosphere, and the weight of the valve itself was
ordinarily sufficient to keep it down. The condensing water, together
with the water of condensation, flows off through the open pipe _p_.
Newcomen's first engine made 6 or 8 strokes a minute; the later and
improved engines made 10 or 12.
The steam-engine has now assumed a form that somewhat resembles the
modern machine.
The Newcomen engine is seen at a glance to have been a combination of
earlier ideas. It was the engine of Huyghens, with its cylinder and
piston as improved by Papin, by the substitution of steam for the
gases generated by the explosion of gunpowder; still further improved
by Newcomen and Calley by the addition of the method of condensation
used in the Savery engine. It was further modified, with the object of
applying it directly to the working of the pumps of the mines by the
introduction of the overhead beam, from which the piston was suspended
at one end and the pump-rod at the other.
The advantages secured by this combination of inventions were many and
manifest. The piston not only gave economy by interposing itself
between the impelling and the resisting fluid, but, by affording
opportunity to make the area of piston as large as desired, it enabled
Newcomen to use any convenient pressure and any desired proportions
for any proposed lift. The removal of the water to be lifted from the
steam-engine proper and handling it with pumps, was an evident cause
of very great economy of steam.
The disposal of the water to be raised in this way also permitted the
operations of condensation of steam, and the renewal of pressure on
the piston, to be made to succeed each other with rapidity, and
enabled the inventor to choose, unhampered, the device for securing
promptly the action of condensation.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account