A comparison of this list with the enumeration above of weapons put in production during the war against Germany indicates that we greatly expanded our artillery in types. That we were able to do this at the outset and go ahead immediately with the production of many weapons strange and unknown to our experience, without waiting to develop models and types of our own, is due solely to the generosity of the governments of France and Great Britain, with whom we became associated. We manufactured in all eight new weapons, taking the designs of three of them from the British and of five from the French. It might seem to the uninitiated that the way of the United States to a great output of artillery would be made smooth by the action of the British and French Governments in agreeing to turn over to us without reservation the blue prints and specifications that were the product of years of development in their gun plants. Yet this was only relatively true. In numerous instances we were not able to secure complete drawings until months after we had entered the war, due to the practice of continental manufacturers that intrusts numerous exact measurements to the memories of the mechanics working in their shops. Consequently it required several months to complete drawings, and when we received them our troubles had only begun. First there came the problem of translating the plans after we received them. All French dimensions are according to the metric system. A millimeter is one one-thousandth part of a meter, and a meter is 39.37 inches. An inch is approximately 0.0254 meter. Thus to translate French plans into American factory practice involves hundreds of mathematical computations, most of them carried out to decimals of four or five places. Moreover, the French shop drawings are put down on an angle of projection different from what is used in this country. This fact involved the recasting of drawings even when the metric system measurements were retained. When it is considered that such a mechanism as the recuperator on the 155-millimeter gun involves the translation of 416 drawings, the fact that the preparation of French plans for our own use never took more than two months is remarkable, particularly so since it was hard to find in the United States draftsmen and engineers familiar with such translation work. Once our specifications were worked out from the French plans, it then became necessary to find American manufacturers willing to bid on the contracts. The average manufacturer would look at these specifications, realize what a highly specialized and involved sort of work would be required in the production of the gun carriages or recoil mechanisms, and shake his head. In numerous instances no such work had ever before been attempted in the United States. However, as the result of efforts on the part of the Government an increased capacity for producing mobile field artillery was created as follows: