2. A shorter liming than the above by the three-pit system. This saved time (taking 9-10 days), saved hide substance, and ensured greater regularity of treatment. The limes were about as mellow, but a little sulphide (2-4 ozs. per hide) was used to assist the depilation, especially during the short-hair season. These goods were also bated. 3. A distinctly longer liming, 15-16 days, in mellower limes. This differed from Type 1 also in the respect that greater regularity was ensured by the three-pit system; a foot or two of old liquor was used in making up the new lime. More hide substance was lost than in either of the above processes, but this was deliberate, the object being to dispense with bating, which is always light for harness hides. Thus a longer and mellower but systematic liming was used as a substitute for shorter liming and bating. No sulphide was used in this process. 4. A short liming of 6-7 days, using up to 12 ozs. of sulphide per hide. The object here is to save time and hide substance. The three-pit system is preferred. Bating again becomes necessary, but the pigeon-dung bate is replaced by artificial bates, less objectionable, quicker, and more scientific in management. 5. A still shorter process of about five days, using still more sulphide (about 16-20 ozs. per hide), together with some calcium chloride to reduce harshness. In such a method there is a tendency to revert to the one-pit system, which involves rather less labour. The three-pit system shows to a great advantage in the longer processes of liming when the process is reduced to five days; there is little difference between the two, for a one-pit system is a two-liquor method. Hence again an artificial bate is used. The various methods of liming, together with analogous variations in tannage, have resulted in great variety in bating. Sometimes up to three days' bating has been given at 70° F., but more often the goods are merely immersed overnight, and then delimed with boric acid, but with sulphide processes it is an advantage to use some of the commercial bates of the ammonium chloride type, and finish off with boric acid. Scudding is always more thorough than for sole or belting, the hides are rounded into long butts which include most of the shoulder "harness backs." The goods are sometimes bate shaved. A few tannages will now be outlined, in order of historic type.