Class Book for the School of Musketry, Hythe: Prepared for the Use of OfficersWilford, Ernest Christian
History
Class Book for the School of Musketry, Hythe: Prepared for the Use of Officers
Wilford, Ernest Christian
Firearms; Gunpowder; Military education; Shooting, Military
Upon the quickness of combustion mainly depends the applicability of
gunpowder for Military purposes.
~Ignition by heat.~
Gunpowder may be inflamed in a variety of ways, but whatever be the
method, one portion of the substance must in the first instance be
raised to a temperature a little above that necessary to sublime the
sulphur, which can be removed from the other ingredients, by gradually
raising the compound to a heat sufficient to drive it off in a state of
vapour. The heat required for this purpose is between 600° and 680°
Fahrenheit.
~Progressive combustion.~
When a charge of powder is exploded in the bore of a gun, to all
appearance there would seem to be an instantaneous generation of the
whole force. But in fact it is not so, a certain time being necessary to
the complete combustion of the substance. This gradual firing is of the
utmost importance, for were it otherwise, the gun, unless of enormous
strength, must be shattered in pieces, as well as the projectile; for in
such a case, this great force being suddenly exerted upon one part only
of the material, there would not be time for the action to be
distributed over the particles, at any great distance, before those in
the immediate vicinity of the explosion, were forced out of the sphere
of action of the cohesive force, and consequently rupture must take
place.
~Substances which have a more violent action than powder.~
The effect of such an action may be observed by exploding detonating
powders, in which are contained chlorate of potash or fulminating
mercury. The action of that peculiar substance the chlorite of nitrogen
is still more remarkable. There is also another compound, containing
three parts of saltpetre, one part of carbonate of potash and one part
of sulphur, which when brought to a certain heat will explode with great
violence, its destructive force being very considerable; and this is
principally due to the rapidity of the evolution of the gas, for its
amount is less than that produced from gunpowder, but the complete
decomposition occurs in a much shorter time.
~In a damp state less quickly fired, and why.~
If gunpowder be in a damp state, the velocity of combustion will be less
than when dry, and also a longer time will be necessary to ignite it,
since the moisture upon its conversion into vapour, absorbs a certain
amount of heat which remains latent, and of which the useful effects so
far as igniting the powder is concerned, is entirely lost.
~Ignition by percussion.~
Gunpowder may be ignited by the percussion of copper against copper,
copper against iron, lead against lead, and even with lead against wood,
when the shock is very great. It is more difficult to ignite gunpowder
between copper and bronze,[1] or bronze and wood than between the other
substances. Again, out of ten samples which were wrapt in paper and
struck upon an anvil with a heavy hammer, seven of grained powder
exploded and nine of mealed.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account