Moreover, it is possible to reverse the action of the hydraulic apparatus so as to gain motion at the expense of power. A familiar type of elevator is a case in point. The essential feature of the hydraulic elevator consists of a ram attached to the bottom of the elevator and extending down into a cylinder, slightly longer than the height to which the elevator is to rise. The ram is fitting into a cylinder with water-tight packing, or a cut leather valve. Water under high pressure is admitted to the cylinder through the valve at the bottom, and the pressure thus supplied pushes up the ram, carrying the elevator with it, of course. Another valve allows the water to escape, so that ram and elevator may descend, too rapid descent being prevented by the partial balancing of ram and elevator with weights acting over pulleys. The ram, to the end of which pressure is thus applied, need be but a few inches in diameter. Water pressure is secured by bringing water from an elevation. Such an elevator acts slowly, but is a very safe and in many ways satisfactory mechanism. Such elevators are still used extensively in Europe, but have been almost altogether displaced in America by the electric elevator. The hydraulic elevator just described is virtually a water engine, the ram acting as piston. A veritable engine, of small size, to perform any species of mechanical work, may be constructed on precisely the same principle, the piston in this case acting in a cylinder similar to that of the ordinary steam engine. Such an engine operates slowly but with great power. It has special utility where it is desirable to apply power intermittently, as in various parts of a dockyard, or in handling guns and ammunition on shipboard. In the former case in particular, it is often inconvenient to use steam power, as steam sent from a central boiler condenses in a way to interfere with its operation. In such a case any number of small water-pressure engines may be operated from a single tank where water is at a high elevation, or where the requisite pressure is secured artificially. In the latter case, the water is kept under pressure by a large piston or ram heavily weighted, the entire receptacle being, of course, of water-tight construction and adapted to withstand pressure. The pump that supplies the tank is ordinarily made to work automatically, ceasing operation as soon as the ram rises to the top of the receptacle, and beginning again whenever, through use of water, the ram begins to descend. Such an apparatus is called an accumulator. Such water engines have come into vogue only in comparatively recent times, being suggested by the steam engine. As already pointed out, their utility is restricted, yet the total number of them in actual use to-day is large, and their share in the world's work is not altogether inconsiderable. V CAPTIVE MOLECULES: THE STORY OF THE STEAM ENGINE