Bait casting is as a rule a very effective method of catching fish, especially in shallow lakes and where fly fishing is not practised. In deep water, trolling or still fishing are usually the best methods of catching fish and often the only methods that will be successful. Trolling consists simply in rowing or paddling slowly with the bait or spoon trailing behind. It is not a scientific way of fishing and requires but little skill. When the fish strikes, it usually hooks itself and all that remains is to reel it into the boat and land it. The conditions on large lakes often make it necessary to follow one of these methods of trolling or still fishing, especially during the warm weather when the big fish have left the spawning grounds and are in deep water. There are trolling devices called spinners that have several gangs of hooks, sometimes as many as fifteen. No real fisherman would use such a murderous arrangement which gives the fish practically no chance at all and in many states their use is properly prohibited by law. A single hook, or at most a single gang of three hooks, is all that any one should ever use. [Illustration: A raised pillar multiplying reel] Every boy knows what still fishing is. It is the common method of baiting our hook, casting it from the shore or from a boat and waiting for a bite. In still fishing it is customary to use a light sinker to keep the bait near the bottom and a float or “cork” which serves the double purpose of keeping the bait away from snags, stones, or weeds on the bottom and also of showing us when we have a bite. The more expert still fishermen never use a float, as they prefer to tell by the pull on the line when a fish has taken the bait. A fishing boat should be thoroughly seaworthy and also have plenty of room. Flat-bottom boats make the best type for fishing, provided that we do not have to row them far or if the place where we use them is not subject to sudden squalls or rough water. The middle seat should contain both a fish well and a minnow box with a dividing partition and with two hinged lids fitted into the seat. Such a boat can be built by an ordinary carpenter and should not cost over ten or twelve dollars. It should be painted every year to keep it in good condition. Use clear white pine or cedar for the sides. The bottom boards should not be fitted tightly together but left with cracks fully a half-inch wide to allow for the swelling of the wood when the boat is launched. The best oarlocks are fastened to the oars and fit in the sockets with a long pin. This arrangement permits one to fish alone, and if trolling to drop the oars quickly and take up the rod without danger of losing them. [Illustration: A landing net should be a part of every fisherman’s outfit]