Scientific American Supplement, No. 417, December 29, 1883Various
Science
Scientific American Supplement, No. 417, December 29, 1883
Various
Science -- Periodicals
The cast iron box, E, is inclosed within a base of refractory clay, L,
which is surmounted by a reflector, M, of the same material, that is
designed to concentrate the heat and increase its radiation. This
reflector terminates above in a dome, in whose center is placed a
refractory clay box. This latter, which is round, is provided in the
center with a cylinder that is closed above. The box contains a large
number of apertures, which give passage to the products of combustion
carried along by the hot air. The carbonic acid which such products
contain is absorbed by a layer of quick-lime that has previously been
introduced into the box, N.
This heating apparatus, which is inclosed within a cast iron casing
similar to that of an ordinary gas stove, is employed without a chimney,
thus permitting of its being placed against the wall or at any other
point whatever in the room to be heated.--_Annales Industrielles_.
* * * * *
IMPROVED GAS BURNER FOR SINGEING MACHINES.
Since the introduction of the process of gas-singeing in finishing
textiles, many improvements have been made in the construction of the
machines for this purpose as well as in that of the burners, for the
object of the latter must be to effect the singeing not only evenly and
thoroughly, but at the same time with a complete combustion of the gas
and avoidance of sooty deposits upon the cloth. The latter object is
attained by what are called atmospheric or Bunsen burners, and in which
the coal gas before burning is mixed with the necessary amount of
atmospheric air. The arrangement under consideration, patented abroad,
has this object specially in view. The main gas pipe of the machine is
shown at A, being a copper pipe closed at one end and having a tap at
the other. On this pipe the vertical pipes, C, are screwed at stated
intervals, each being in its turn provided with a tap near its base. On
the top of each vertical table the burner, IJ, is placed, whose upper
end spreads in the shape of a fan, and allows the gas to escape through
a slit or a number of minute holes. Over the tube, C, a mantle, E, is
slipped, which contains two holes, HG, on opposite sides, and made
nearly at the height of the outlet of the gas. When the gas passes out
of this and upward into the burner, it induces a current of air up
through the holes, HG, and carries it along with it. By covering these
holes with a loose adjustable collar, the amount of admissible air can
be regulated so that the flame is perfectly non-luminous, and therefore
containing no free particles of carbon or soot. The distance of the
vertical tubes, C; and of the fan-shaped burners is calculated so that
the latter touch each other, and thus a continuous flame is formed,
which is found to be the most effective for singeing cloth. Should it be
deemed advisable to singe only part of the cloth, or a narrow piece,
the arrangement admits of the taps, D, being turned off as
desired.--_Textile Manufacturer_.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account