Surgical Experiences in South Africa, 1899-1900: Being Mainly a Clinical Study of the Nature and Effects of Injuries Produced by Bullets of Small CalibreMakins, George Henry
History
Surgical Experiences in South Africa, 1899-1900: Being Mainly a Clinical Study of the Nature and Effects of Injuries Produced by Bullets of Small Calibre
Makins, George Henry
Gunshot wounds; South African War, 1899-1902; Surgery, Military
In point of fact, with unaltered regulation bullets I was never able to
determine any very material difference between the wounds produced,
further than that the wounds of entry and exit in the soft parts tended
to correspond with the calibre of the particular bullet concerned.
Although the immense majority of the wounds which came under my notice
were caused by the Mauser bullet, yet I saw some hundreds of wounded
Boers and a good many of our own men wounded by Lee-Metford bullets, in
the latter case no doubt by some of the sporting varieties. The only
cases that I can call to mind or have noted as exhibiting a superior
wounding power in the Lee-Metford bullet are some injuries to bone. Thus
I saw a considerable number of clean perforations of the patella
produced by Mauser bullets, while the only two Boers whom I saw with
injured patellae had suffered transverse fractures. Again, I have a
lively recollection of an old Boer who had suffered a fracture of the
middle third of the femur, in the thigh of whom, with small apertures of
entry and exit, a cavity of destroyed tissue, five inches across, was
found beneath the fascia lata at the distal side of the fracture. I
cannot however say that I did not observe many equally severe injuries
to the femur produced by Mauser bullets in our own men, and as far as
fractures of the skull went, a somewhat crucial test, among the men
brought off the battlefield alive, I never saw any difference in
severity whatever.
[Illustration: FIG. 15.--Sections of four Bullets to show relative shape
and thickness of mantles.
From left to right: 1. Guedes; regular dome-shaped tip; mild steel
mantle; thickness at tip 0.8 mm.; at sides of body 0.3 mm. 2.
Lee-Metford; ogival tip; cupro-nickel mantle; thickness at tip 0.8 mm.;
gradual decrease at sides to 0.4 mm. 3. Mauser; pointed dome tip, steel
mantle plated with copper alloy; thickness at tip 0.8 mm.; gradual
decrease at sides to 0.4 mm. 4. Krag-Joergensen; ogival tip as in
Lee-Metford; steel mantle plated with cupro-nickel; thickness at tip 0.6
mm.; gradual decrease at sides to 0.4 mm. The measurements of the sides
are taken 2.5 cm. from the tip. Note the more gradual thinning in the
Lee-Metford mantle.]
These points of comparison having been made, it only remains to consider
one other point, that of the relative stability of the bullets. This is
a matter of the greatest importance as regards the regularity or
otherwise of the wounding power of the projectile, and, as far as my
experience went, I believe the Mauser to far exceed the Lee-Metford in
instability of structure.
The core of all four bullets is composed of lead hardened by a certain
admixture of tin or antimony, but the mantle differs in composition,
thickness both general and in different parts of the bullet, mode of
fixation, and consequently in its power of resistance to violence.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account