The Century of Inventions of the Marquis of Worcester: from the Original MS., with Historical and Explanatory Notes and a Biographical MemoirWorcester, Edward Somerset, Marquis of
History
The Century of Inventions of the Marquis of Worcester: from the Original MS., with Historical and Explanatory Notes and a Biographical Memoir
Worcester, Edward Somerset, Marquis of
Industrial arts -- Early works to 1800; Inventions -- Early works to 1800
A means of purifying the tallow, and as such, of rendering the
candles whiter and more durable, likewise suggests itself in
the following simple process. The vat, or copper, containing
the melted tallow, must be provided with a shower bath placed
immediately over the surface, to which must be attached a
reservoir of cold water: this, by the action of a lever, may be
thrown through the grating of the bath, and falling upon the
tallow, will, in its passage, carry to the bottom of the vat
the whole of the carbonised animal matter and other impurities
with which it is charged. After allowing a few minutes for the
lighter fluid to rise, the water may then be drawn off, by a
cock placed at the bottom of the vat for that purpose, and the
same process repeated till the tallow is fit for use.
No. LXXXVIII.
An engine, without the least noise, knock, or use of fire, to coin
and stamp 100lbs. in an hour, by one man.
NOTE.
Antoine Boucher appears to have been the first engraver who used
the fly-press for the multiplying of metallic impressions from
an engraved matrix. This ingenious mechanic was employed by
Henry the Second of France, and the first money was struck with
it in that kingdom about the middle of the sixteenth century;
it was soon however laid aside on account of the great expense
attendant on its use, and the old method of striking with the
hammer was again resorted to. Queen Elizabeth also had milled
money coined in England about the same period; but it did not
continue for more than ten years; and it was not till 1662, that
the screw press was finally established in the mint of this
kingdom. The accelerated motion of a screw, although possessing
many advantages over the old method, does not appear fully to
answer the above description, as the noise attendant on its use
is certainly very considerable; it is probable therefore, that
the hydrostatic press, or a powerful lever worked by a crank,
was intended by the noble author as a substitute for this useful
machine.
It appears probable that the insertion of this Article
originated in an ignorance of the plan formerly proposed by
Boucher, which appears of all others best adapted for the
purpose of coining with rapidity, and which was not at that
period acted upon in England; on the discovery of which the
following Article was substituted by the noble author; and
appeared in the first printed edition of the _Century_.
No. LXXXVIII.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account