All the above recipes give blacks of a bluish tone, which on the whole have a good bloomy and solid appearance. Often what is called a jet black is wanted, this can be obtained by following the recipe given below. _Chrome Logwood Jet Black_.--Mordant the wool by any of the methods given above. The dyeing is done in a bath made from 40 lb. logwood and 5 lb. fustic, working as described in the first recipe. Using these properties a good jet black is obtained, which is quite satisfactory on the score of solidity and fastness. It is not advisable to exceed the quantity of fustic here given, or otherwise the black will have a tendency to assume a greenish tone that is not at all desirable. This greening becomes more marked when from 7-1/2 to 10 lb. of fustic is used, or if alum be added to the mordant along with the bichromate of potash. Chrome blacks are the best blacks which can be obtained from (p. 086) logwood. They have, however, a tendency to turn green on exposure to the weather, which tendency seems to be most prevalent in those blacks in which sulphuric acid has been used as the acid constituent of the mordanting bath. The greening may be reduced to a minimum by adding to the dye-bath about 1 to 2 lb. of Alizarine. Another plan which has been followed is to give the wool a bottom with 5 to 6 lb. of camwood or peachwood, then mordanting and dyeing us usual. _Logwood Black on Wool_.--Boil first for one hour with a decoction of 8 lb. camwood, then lay down for fifty minutes in a boiling bath of 3 lb. bichromate of potash, 1 lb. alum, 1 lb. tartar. It is a good plan to allow the goods to hang overnight. The dye-bath is prepared with 45 lb. logwood, 8 lb. fustic, 4 lb. sumac. Dye one hour at the boil, wash and dry. _Indigo Black_.--This is sometimes called woaded black, and has an excellent reputation as a fast black. It is dyed by first giving the wool a medium blue bottom in the indigo vat by the method of vat dyeing, which will be described later on, and then dyeing by either the second or third recipe given above. The use of sulphuric acid is rather to be avoided in dyeing an indigo vat with chrome and logwood, as the chromic acid set free during the process is likely to attack and by destroying the indigo to materially reduce the intensity of the blue bottom. Or, after blueing in the vat, the black may be dyed or topped on by the process with copperas, which will be described below. _Iron Logwood Black_.--Mordant the wool by boiling one and a half to two hours in a bath made with 5 lb. copperas, 2 lb. bluestone, 2 lb. alum, and 10 lb. argol. The dyeing is done in a bath of 50 lb. logwood.