Another feature is that of the expansive motion of the bar itself. The expansion of the bar due to the heating varies in value along its length, from a maximum at the hot end to a minimum at the cool end. The expansion, also, is the evidence of a transformation of energy. The bar has been constrained into its new form against the action of the internal molecular or cohesive forces of its material (§ 16). The energy employed and transformed in producing the expansion is a part of the original heat energy applied to the bar, and before any transmission of this heat energy takes place between its extreme ends, a definite modicum of the applied energy has to be completely transformed for the sole purpose of producing this distortive movement or expansion against cohesion. This preliminary straining of the bar is, in fact, a part of the process of building up or constituting the energy transmission machine, and must be completely carried out before any transmission can take place. It is clear, then, that concurrent with the gradient of temperature, there also exists, along the bar, what might be termed a gradient of energy stored against cohesion, and that both are characteristic and essential features of this particular energy machine. A point of some importance to note is the permanency of these features. Once the machine has been constituted with a constant temperature difference, the transmission of energy will take place continuously and at a uniform rate. But no further transformation against cohesion takes place; no further expenditure of energy against the internal forces of the material is necessary. Neglecting certain losses due to possible external conditions, the whole energy applied to the machine at the one end is transmitted in its entirety to the other, without influencing in any way either the temperature or the energy gradient. Such is the general constitution of this machine for energy transmission. Its material foundation is, indeed, the metallic bar, but the temperature and energy gradients may be termed the true determining factors of its operation. As already indicated, the magnitude of the transformation is dependent on the temperature difference between the ends of the bar. But this applies only within certain limits. With respect to the cool end, the temperature may be as low as we please--so far as we know, the limit is absolute zero of temperature; but with the hot end, the case is entirely different, because here the limit is very strictly imposed by the melting-point of the material of the bar. When this melting temperature is attained, the melting of the bar indicates, simply, that the heat energy stored or transformed against the cohesive forces of the material has reached its limiting value; change of state of the material is taking place, and the machine is thereby being destroyed.