pointed out a vital defect in Newcomen’s construction: involving either a loss of steam, and consequent waste of fuel, or a loss of power from the piston’s descending at every stroke through a very imperfect vacuum. It soon occurred to Watt, that if the condensation were performed in a separate vessel, one great evil, the cooling of the cylinder, and the consequent waste of steam, would be avoided. The idea once started, he soon verified it by experiment. By means of an arrangement of cocks, a communication was opened between the cylinder, and a distinct vessel exhausted of its air, at the moment when the former was filled with steam. The vapour of course rushed to fill up the vacuum, and was there condensed by the application of external cold, or by a jet of water: so that fresh steam being continually drawn off from the cylinder to supply the vacuum continually created, the density of that which remained might be reduced within any assignable limits. This was the great and fundamental improvement. Still, however, there was a radical defect in the atmospheric engine, inasmuch as the air being admitted into the cylinder at every stroke, a great deal of heat was abstracted, and a proportionate quantity of steam wasted. To remedy this, Watt excluded the air from the cylinder altogether; and recurred to the original plan of making steam the moving power of the engine, not a mere agent to produce a vacuum. In removing the difficulties of construction which beset this new plan, he displayed great ingenuity and powers of resource. On the old plan, if the cylinder was not bored quite true, or the piston not accurately fitted, a little water poured upon the top rendered it perfectly air-tight, and the leakage into the cylinder was of little consequence, so long as the injection water was thrown into that vessel. But on the new plan, no water could possibly be admitted within the cylinder; and it was necessary, not merely that the piston should be air-tight, but that it should work through an air-tight collar, that no portion of the steam admitted above it might escape. This he accomplished by packing the piston and the stuffing-box, as it is called, through which the piston-rod works, with hemp. A farther improvement consisted in equalizing the motion of the engine by admitting the steam alternately above and below the piston, by which the power is doubled in the same space, and with the same strength of material. The vacuum of the condenser was perfected by adding a powerful pump, which at once drew off the condensed, and injection water, and with it any portion of air which might find admission; as this would interfere with the action of the engine, if allowed to accumulate. His last great change was to cut off the communication between the cylinder and the boiler, when a portion only, as one-third or one-half, of the stroke was performed; leaving it to the expansive power of the steam to complete it. By this,