The Mechanical Properties of Wood: Including a Discussion of the Factors Affecting the Mechanical Properties, and Methods of Timber TestingRecord, Samuel J. (Samuel James)
Science
The Mechanical Properties of Wood: Including a Discussion of the Factors Affecting the Mechanical Properties, and Methods of Timber Testing
Record, Samuel J. (Samuel James)
Wood; Wood -- Testing
The structure of the hardwoods is more complex. They are more or
less filled with vessels, in some cases (oak, chestnut, ash)
quite large and distinct, in others (buckeye, poplar, gum) too
small to be seen plainly without a small hand lens. In
discussing such woods it is customary to divide them into two
large classes--_ring-porous_ and _diffuse-porous_. (See Fig.
22.) In ring-porous species, such as oak, chestnut, ash, black
locust, catalpa, mulberry, hickory, and elm, the larger vessels
or pores (as cross sections of vessels are called) become
localized in one part of the growth ring, thus forming a region
of more or less open and porous tissue. The rest of the ring is
made up of smaller vessels and a much greater proportion of wood
fibres. These fibres are the elements which give strength and
toughness to wood, while the vessels are a source of weakness.
In diffuse-porous woods the pores are scattered throughout the
growth ring instead of being collected in a band or row.
Examples of this kind of wood are gum, yellow poplar, birch,
maple, cottonwood, basswood, buckeye, and willow. Some species,
such as walnut and cherry, are on the border between the two
classes, forming a sort of intermediate group.
If one examines the smoothly cut end of a stick of almost any
kind of wood, he will note that each growth ring is made up of
two more or less well-defined parts. That originally nearest the
centre of the tree is more open textured and almost invariably
lighter in color than that near the outer portion of the ring.
The inner portion was formed early in the season, when growth
was comparatively rapid and is known as _early wood_ (also
spring wood); the outer portion is the _late wood_, being
produced in the summer or early fall. In soft pines there is not
much contrast in the different parts of the ring, and as a
result the wood is very uniform in texture and is easy to work.
In hard pine, on the other hand, the late wood is very dense and
is deep-colored, presenting a very decided contrast to the soft,
straw-colored early wood. (See Fig. 23.) In ring-porous woods
each season's growth is always well defined, because the large
pores of the spring abut on the denser tissue of the fall
before. In the diffuse-porous, the demarcation between rings is
not always so clear and in not a few cases is almost, if not
entirely, invisible to the unaided eye. (See Fig. 22.)
[Illustration: FIG. 23.--Cross section of longleaf pine showing
several growth rings with variations in the width of the
dark-colored late wood. Seven resin ducts are visible. X 33.
_Photomicrograph by U.S. Forest Service_]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account