In the above figure (Fig. 8) taken from Sir Henry de la Beche's "Sections and Views Illustrative of Geological Phænomena," Plate II., the lower drawing represents a section drawn to true scale, while that above shows one which is exaggerated. The student who saw this would infer that the uppermost beds on the left side of the upper section rested unconformably upon the dotted beds beneath, and once abutted against them in that portion of the figure where the beds have been removed by denudation in the deep valley, whereas an examination of the section drawn to true scale shows that the unconformity does not exist (although there is one at the base of the deposits marked by dots), and that there is room for the higher deposits to pass above those marked by dots at the place where the former have been removed by denudation. Whenever possible, horizontal sections should be drawn to true scale, the vertical heights being on the same scale as the horizontal distances. Sections which are so drawn represent the nature of the surface of the country as well as the relationship of the strata, and often illustrate in a marked degree the influence which the character of the strata has exerted upon the nature of the superficial features of a country. If it be impossible to draw a section in which the elevations and horizontal distances are represented upon a true scale, the former ought to be drawn on a scale which is a multiple of the latter; thus the vertical heights may be shown on 2, 3, or 4 or more times the scale chosen for the horizontal distances; when this is done, it will often be necessary to show the strata with an exaggerated dip, and accordingly the exaggerated section loses some of its value, though if vertical and horizontal scales bear some definite proportion it will still be more valuable than a rough diagram which is not drawn to any scale.