A History of the Growth of the Steam-EngineThurston, Robert Henry
History
A History of the Growth of the Steam-Engine
Thurston, Robert Henry
Steam-engines -- History
The advantage of introducing double engines at sea is considerably
greater than on land. The coal carried by a steam-vessel is not only
an item of great importance in consequence of its first cost, but,
displacing its weight or bulk of freight which might otherwise be
carried, it represents so much non-paying cargo, and is to be charged
with the full cost of transportation in addition to first cost. The
best of steam-coal is therefore usually chosen for steamers making
long voyages, and the necessity of obtaining the most economical
engines is at once seen, and is fully appreciated by steamship
proprietors. Again, an economy of one-fourth of a pound per
horse-power per hour gives, on a large transatlantic steamer, a saving
of about 100 tons of coal for a single voyage. To this saving of cost
is to be added the gain in wages and sustenance of the labor required
to handle that coal, and the gain by 100 tons of freight carried in
place of the coal.
For many years the change which has here been outlined, in the forms
of engine and the working of steam expansively, was retarded by the
inefficiency of methods and tools used in construction. With gradual
improvement in tools and in methods of doing work, it became possible
to control higher steam and to work it successfully; and the change in
this direction has been steadily going on up to the present time with
all types of steam-engine. At sea this rise of pressure was for a
considerable time retarded by the serious difficulty encountered in
the tendency of the sulphate of lime to deposit in the boiler. When
steam-pressure had risen to 25 pounds per square inch, it was found
that no amount of "blowing out" would prevent the deposition of
seriously large quantities of this salt, while at the lower pressures
at first carried at sea no troublesome precipitation occurred, and the
only precaution necessary was to blow out sufficient brine to prevent
the precipitation of common salt from a supersaturated solution. The
introduction of surface-condensation was promptly attempted as the
remedy for this evil, but for many years it was extremely doubtful
whether its disadvantages were not greater than its advantages. It was
found very difficult to keep the condensers tight, and boilers were
injured by some singular process of corrosion, evidently due to the
presence of the surface-condenser. The simple expedient of permitting
a very thin scale to form in the boiler was, after a time, hit upon as
a means of overcoming this difficulty, and thenceforward the greatest
obstacle to the general introduction was the conservative disposition
found among those who had charge of marine machinery, which
conservatism regarded with suspicion every innovation. Another trouble
arose from the difficulty of finding men neither too indolent nor too
ignorant to take charge of the new condenser, which, more complicated
and more readily disarranged than the old, demanded a higher class of
attendants.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account