A System of Instruction in the Practical Use of the Blowpipe: Being A Graduated Course Of Analysis For The Use Of Students And All Those Engaged In The Examination Of Metallic CombinationsAnonymous
Science
A System of Instruction in the Practical Use of the Blowpipe: Being A Graduated Course Of Analysis For The Use Of Students And All Those Engaged In The Examination Of Metallic Combinations
Anonymous
Blowpipe
Upon charcoal, in the flame of reduction, and particularly with the
addition of tin, the bead is colorless and transparent while hot, but
while cooling becomes of a dark-gray color and opaque.
Oxide of bismuth is reduced, by fusion with carbonate of soda, as well
in the oxidating as in the reducing flame, instantly to metallic
bismuth.
As the above mentioned higher oxides of bismuth are converted by
ignition into oxide of the metal and free oxygen, they have the same
behavior before the blowpipe.
As bismuth occurs mostly in the metallic form, it is necessary to know
how to distinguish it from metals similar to it. Its brittleness
distinguishes it from lead, zinc and tin, as they are readily
flattened by a stroke of the hammer, while bismuth is broken to
pieces. Bismuth, in this latter respect, might perhaps be mistaken
for antimony or tellurium; but, by the following examination, it is
easy to separate bismuth from antimony or tellurium.
1. Neither bismuth nor antimony sublimates when heated in a glass tube
closed at one end. At a temperature which is about to fuse the glass,
tellurium yields a small quantity of a white vapor (some tellurium is
oxidized to tellurous acid by the oxygen of the air in the tube).
After that, a grey metallic sublimate settles on the sides of the
tube.
2. Heated in an open tube, antimony yields a white vapor, which coats
the inside of the glass tube, and can be driven by heat from one part
of the tube to another without leaving a residue. The metallic globule
is covered with a considerable quantity of fused oxide. Tellurium
produces, under the same circumstances, an intense vapor, and deposits
on the glass a white powder, which melts by heat into globules that
run over the glass. The metallic globules are covered by fused,
transparent, and nearly colorless oxide, which becomes white while
cooling. By a high temperature, and with little access of air,
metallic tellurium sublimes with the deposition of a grey powder.
Bismuth produces, under similar treatment, scarcely any vapor, unless
it is combined with sulphur. The metal is enveloped by fused oxide of
a dark yellow color, which appears light yellow after being cooled. It
acts upon the glass, and dissolves it.
3. Upon charcoal, exposed to the blowpipe flame, the three metals are
volatilized, and yield a sublimate upon the charcoal. That of antimony
is white, while those of bismuth and tellurium are dark yellow. By
exposing them to the flame of reduction, the sublimate of tellurium
disappears and communicates an intense green color to the flame. The
antimony incrustation gives a feeble greenish-blue color, while the
sublimate of bismuth gives no perceptible color in the light. It is,
however, worthy of notice that if the operation takes place in the
dark, a very pale blue flame will be seen with the bismuth.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account