--------------+---------------------------+--------------------- Sulphur added.| Sulphur found in | Sulphur found in |Hydrochloric Acid Solution.|Nitric Acid Solution. --------------+---------------------------+--------------------- 5 milligrams | 8 milligrams | 0.03 milligrams 10 " | 11 " | 0.03 " 15 " | 17 " | 12.00 " --------------+---------------------------+--------------------- ~Bismuth.~--Nearly all samples of copper contain bismuth, but only in small quantities. It is best determined colorimetrically as described under _Bismuth_. The method of concentrating and preparing the solution for colorimetric assay is as follows. Dissolve 10 grams of copper in nitric acid, as in the other determinations; neutralise with soda; add 1 or 1.5 grams of bicarbonate of soda and boil for ten minutes; filter, dissolve the precipitate in hot dilute sulphuric acid; add sulphurous acid and potassium iodide in excess, and boil till free from iodine. Filter and dilute to 500 c.c. Take 50 c.c. of the yellow solution for the determination. A few c.c. of a dilute solution of sulphurous acid (1 in 100) will prevent the liberation of iodine. The following experiments test the method of separation. Ten grams of copper were treated as above and precipitated with 1.5 gram of "soda;" the precipitate contained 0.6 milligram of bismuth (= 0.006 per cent.). The filtrate treated with another 1.5 gram of "soda" gave a precipitate which was free from bismuth. To the filtrate from this was added 1.0 milligram of bismuth, and another fraction was precipitated with 1.5 gram of "soda." In this precipitate was found 1.0 milligram of bismuth. To the filtrate another milligram of bismuth was added and the separation with "soda" repeated. The bismuth was separated from this precipitate with ammonic carbonate before determination, and 0.9 milligram was found.