China clay or kaolin is sold in the form of large lumps of a white or yellowish-white colour. It is formed by the gradual disintegration of felspar by means of the action of air and water, and consists essentially of a silicate of aluminium. Its quality depends upon its whiteness and its freedom from coarse micaceous particles. It is usually prepared for admixture with the pulp by making it into a fine cream with water in a vessel provided with stirrers; it is then passed through a fine sieve in order to remove any impurities it may contain, and is then run into the beater. The clay or other filling material is usually run into the beater as soon as the latter is charged with pulp, so that by the time the beating operation is concluded, a perfect admixture of pulp and clay is effected. Sulphate of lime, or “pearl-hardening,” is usually sufficiently pure to put direct into the engine. It is made by decomposing a solution of calcium chloride, with sulphate of soda, and is precipitated as a fine brilliantly white powder, consisting of CaSO_{4} + 2 H_{2}O. Two distinct forms of precipitated calcium sulphate are met with in commerce, differing from each other by their microscopical features, the one consisting of flat tabular crystals (Fig. 41), the other of fine needles (Fig. 42). Another form, erroneously called precipitated pearl-hardening, is also sold: it consists of the finely ground native mineral. [Illustration: FIG. 40.] [Illustration: FIG. 41.] Some of the finer qualities of paper are made without addition of any loading material whatever, though such papers are of course the exception. The proportion of clay or {132} other material that can be put into a fibre depends to a certain extent upon the nature of the fibre, and upon the degree of fineness to which it is reduced in the beater. The amount added by different makers varies considerably, from {133} two or three per cent. to twenty, and even in rare cases to thirty per cent. [Illustration: FIG. 42.] [Illustration: FIG. 43.]