54. THE screw is the fifth mechanical power. There are two ways of applying this instrument. Sometimes it is screwed into a hole, as in fig. 45, where the screw A B is screwed through the plank C D. Sometimes the screw is applied to the teeth of a wheel, as in fig. 46, where the thread of the screw A B turns in the teeth of a wheel C D. In both these cases, if a bar, as A E, be fixed to the end A of the screw; the force, wherewith the end B of the screw in fig. 45 is forced down, and the force, wherewith the teeth of the wheel C D in fig. 44 are held, bears the same proportion to the power applied to the end E of the bar; as the velocity, wherewith the end E will move, when the screw is turned, bears to the velocity, wherewith the end B of the screw in fig. 43, or the teeth of the wheel C D in fig. 46, will be moved. 55. THE inclined plane affords also a means of raising a weight with less force, than what is equal to the weight it self. Suppose it were required to raise the globe A (in fig. 47.) from the ground B C up to the point, whose perpendicular height from the ground is E D. If this globe be drawn along the slant D F, less force will be required to raise it, than if it were lifted directly up. Here if the force applied to the globe bear the same proportion only to its weight, as E D bears to F D, it will be sufficient to hold up the globe; and therefore any addition to that force will put it in motion, and draw it up; unless the globe, by pressing against the plane, whereon it lies, adhere in some degree to the plane. This indeed it must always do more or less, since no plane can be made so absolutely smooth as to have no inequalities at all; nor yet so infinitely hard, as not to yield in the least to the pressure of the weight. Therefore the globe cannot be laid on such a plane, whereon it will slide with perfect freedom, but they must in some measure rub against each other; and this friction will make it necessary to imploy a certain degree of force more, than what is necessary to support the globe, in order to give it any motion. But as all the mechanical powers are subject in some degree or other to the like impediment from friction; I shall here only shew what force would be necessary to sustain the globe, if it could lie upon the plane without causing any friction at all. And I say, that if the globe were drawn by the cord G H, lying parallel to the plane D F; and the force, wherewith the cord is pulled, bear the same proportion to the weight of the globe, as E D bears to D F; this force will sustain the globe. In order to the making proof of this, let the cord G H be continued on, and turned over the pulley I, and let the weight K be hung to it. Now I say, if this weight bears the same proportion to the globe A, as D E bears to D F, the weight will support the globe. I think it is very manifest, that the center of the globe A will lie in one continued line with the cord H G. Let L be the center