Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and PowerLeeds, F. H. (Frank Henley)
Science
Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and Power
Leeds, F. H. (Frank Henley)
Acetylene
It is not possible to give a direct answer to the question as to which is
the best type of acetylene generator. There are no generators made by
responsible firms at the present time which are not safe. Some may be
easier to charge and clean than others; some require more frequent
attention than others; some have moving parts less likely to fail, when
handled carelessly, than others; some have no moving mechanism to fail.
For the illumination of a large institution or district where one man can
be fully occupied in attending to the plant, cleaning, lighting, and
extinguishing the lamps, or where other work can be found for him so as
to leave him an hour or so every day to look after the apparatus, the
hand-fed carbide-to-water generator L (Fig. 6) has many advantages, and
is probably the best of all. In smaller installations choice must be made
first between the automatic and the non-automatic principle--the
advantages most frequently lying with the latter. If a non-automatic
generator is decided upon, the hand carbide-feed or the flooded-
compartment apparatus is almost equally good; and if automatism is
desired, either a flooded-compartment machine or one of the most
trustworthy types of carbide-feed apparatus may be taken. There are
contact apparatus on the markets which appear never to have given
trouble, and those are worthy of attention. Some builders advocate their
own apparatus because the residue is solid and not a cream. If there is
any advantage in this arising from greater ease in cleaning and
recharging the generator and in disposing of the waste, that advantage is
usually neutralised by the fear that the carbide may not have been wholly
decomposed within the apparatus; and whereas any danger arising from
imperfectly spent carbide being thrown into a closed drain may be
prevented by flooding the residue with plenty of water in an open vessel,
imperfect decomposition in the generator means a deficiency in the amount
of gas evolved from a unit weight of solid taken or purchased. In fact,
setting on one side apparatus which belong to a notoriously defective
system and such as are constructed in large sizes on a system that is
only free from overheating, &c., in small sizes; setting aside all
generators which are provided with only one decomposing chamber when they
are of a capacity to require two or more smaller ones that can more
efficiently be cooled with water jackets; and setting aside any form of
plant which on examination is likely to exhibit any of the more serious
objections indicated in this and the previous chapters, there is
comparatively little to choose, from the chemical and physical points of
view, between the different types of generators now on the markets. A
selection may rather be made on mechanical grounds. The generator must be
well able to produce gas as rapidly as it will ever be required during
the longest or coldest evening; it must be so large that several more
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account