Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and PowerLeeds, F. H. (Frank Henley)
Science
Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and Power
Leeds, F. H. (Frank Henley)
Acetylene
HARMFULNESS OF IMPURITIES.--The reasons why the carbide impurities must
be removed from acetylene before it is burned have now to be explained.
From the strictly chemical point of view there are three compounds of
phosphorus, all termed phosphoretted hydrogen or phosphine: a gas, PH_3;
a liquid, P_2H_4; and a solid, P_4H_2. The liquid is spontaneously
inflammable in presence of air; that is to say, it catches fire of itself
without the assistance of spark or flame immediately it comes in contact
with atmospheric oxygen; being very volatile, it is easily carried as
vapour by any permanent gas. The gaseous phosphine is not actually
spontaneously inflammable at temperatures below 100° C.; but it oxidises
so rapidly in air, even when somewhat diluted, that the temperature may
quickly rise to the point of inflammation. In the earliest days of the
acetylene industry, directly it was recognised that phosphine always
accompanies crude acetylene from the generator, it was believed that
unless the proportion were strictly limited by decomposing only a carbide
practically free from phosphides, the crude acetylene might exhibit
spontaneously inflammable properties. Lewes, indeed, has found that a
sample of carbide containing 1 per cent of calcium phosphide gave
(probably by local decomposition--the bulk of the phosphide suffering
attack first) a spontaneously inflammable gas; but when examining
specimens of commercial carbide the highest amount of phosphine he
discovered in the acetylene was 2.3 per cent, and this gas was not
capable of self-inflammation. According to Bullier, however, acetylene
must contain 80 per cent of phosphine to render it spontaneously
inflammable. Berdenich has reported a case of a parcel of carbide which
yielded on the average 5.1 cubic foot of acetylene per lb., producing gas
which contained only 0.398 gramme of phosphorus in the form of phosphine
per cubic metre (or 0.028 per cent. of phosphine) and was spontaneously
inflammable. But on examination the carbide in question was found to be
very irregular in composition, and some lumps produced acetylene
containing a very high proportion of phosphorus and silicon compounds. No
doubt the spontaneous inflammability was due to the exceptional richness
of these lumps in phosphorus. As manufactured at the present day, calcium
carbide ordinarily never contains an amount of phosphide sufficient to
render the gas dangerous on the score of spontaneous inflammability; but
should inferior material ever be put on the markets, this danger might
have to be guarded against by submitting the gas evolved from it to
chemical analysis. Another risk has been suggested as attending the use
of acetylene contaminated with phosphine (and to a minor degree with
sulphuretted hydrogen), viz., that being highly toxic, as they
undoubtedly are, the gas containing them might be extremely dangerous to
breathe if it escaped from the service, or from a portable lamp,
unconsumed.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account