In this phase of artillery the Germans led the way, for the simple reason that they recognised the military value of aerial navigation years in advance of their contemporaries. Again, in this field the Krupp Organisation has played a prominent part. It embarked upon actual construction of weapons while its rivals in other countries were content to prepare their drawings, which were filed against "The Day." But it must not be thought that because the German manufacturers of armaments were ahead of their contemporaries they dominated the situation. Far from it. Their competitors in the market of destruction were every whit as keen, as ingenious, and as enterprising. Kruppism saw a commercial opportunity to profit from advertisement and seized it: its rivals were content to work in secret upon paper, to keep pace with the trend of thought, and to perfect their organisations so as to be ready for the crisis when it developed. The first Krupp anti-aircraft field-piece was a 6.5 centimetre (2 9/16 inch) arm. It possessed many interesting features, the most salient of which was the design of the axle of the carriage. The rigid axle for the two wheels was replaced by an axle made in two sections, and joined together in the form of a universal coupling, so that each wheel virtually possessed its own axle, or rather half-axle. This was connected with the cradle of the gun in such a manner that the wheels were laterally pivoted thereon. The result is that each axle can be turned forward together with its wheel, and thus the wheels have their rims brought into line to form an arc of a circle, of which the rear end of the spade of the gun carriage constitutes the centre. This acts as a pivot, about which the gun can be turned, the pair of wheels forming the runners for the achievement of this movement. The setting of the weapon in the firing position or its reversion to the travelling position can be easily and speedily effected merely by the rotation of a handwheel and gearing. With this gun a maximum elevation of 60 degrees is possible, owing to the trunnions being carried well behind the breech in combination with the system of long steady recoil. The balancing spring which encloses the elevating screw is contained in a protected box. The recoil brake, together with the spring recuperator, follows the usual Krupp practice in connection with ordinary field pieces, as does also the automatic breech-closing and firing mechanism. In fact there is no pronounced deviation from the prevailing Krupp system, and only such modifications as are necessary to adapt the arm to its special duty. When the gun is elevated to high angles the shell, after insertion the breech is prevented from slipping out by means of a special device, so that the proper and automatic closing of the breech is not impaired in any way.