PHYSICS, MECHANICS, AND CHEMISTRY. ART. XV. _On the Revolving Steam-Engine, recently invented by_ SAMUEL MOREY, _and Patented to him on the 14th July, 1815, with four Engravings_. _To Professor Silliman._ SIR, The successful employment of the steam-engine, in navigating the rivers and inland waters of the United States, and the probable extension of this mode of conveyance of persons and property, makes those improvements desirable which adapt the steam-engine to this purpose with less complication and expense, placing it more within reach of individual enterprise, and rendering it even useful on our small rivers and canals. The steam-engine, though often seen in operation, is not readily understood by an observer, without an acquaintance with the facts in natural philosophy on which its power depends: and it may elucidate the subject of this communication to advert, for a moment, to the gradations by which this important machine has attained its present perfection. It will be recollected that as early as 1663, the Marquis of Worcester published some obscure hints of a mechanical power derived from the elastic force of steam. In 1669, Savary, availing himself of the suggestion, and pursuing the subject more scientifically, invented his engine, consisting of an apparatus to cause a vacuum by the condensation of steam, so that the water to be raised would thereupon, by the external weight of the atmosphere, rise into the chamber of the apparatus, which the steam had occupied. As caloric becomes latent in the steam which it forms at 212° of Fahrenheit, and the steam thus formed occupies 1800 times the bulk of the water composing it; and as it returns instantly to a state of water on losing its heat, by contact with any thing cold, Savary easily produced his vacuum by the injection of a little cold water. He also used (though in a very disadvantageous manner) the expansive force of steam to drive the water out of the chamber, through a pipe different from that by which it entered. It is doubtful whether this kind of engine was ever erected on a scale of any magnitude; for, a few years later, Newcomen and Crawley invented the first engine with a cylinder and piston; and Savary, abandoning his own, united with them in bringing their engine into use. As steam drives out air, the principle of this engine was to let steam into the cylinder beneath the piston, where (the piston having risen to the top of the cylinder) a jet of cold water[22] condensed the steam, produced a vacuum, and the piston, working air tight, descended by the pressure of the atmosphere upon it, this pressure being a weight of nearly fifteen pounds to each square inch; so that if the cylinder were two feet diameter, it would amount to a weight of three tons.