=Proportions.=--Various mixtures for the concrete are employed because these may properly vary to some extent with the exact character and grading of the aggregates. Experience seems to have shown that the concrete used for the wearing surface should have a crushing strength of at least 2500 pounds per square inch, and the mixture adopted is based on the requirements that will give the desired crushing strength. The common mixture for the one course pavement is one part cement, two parts sand and three and one-half parts coarse aggregate. For the wearing course of the two-course type of pavement, a mixture of the same kind is very often specified. While these are perhaps the most widely adopted proportions, many others have been used, especially where the aggregates exhibit peculiarities or the traffic conditions are unusual. It is desired to emphasize that the purpose is to obtain concrete of the desired strength and there can be no such thing as "standard" proportions. =Measuring Materials.=--In considering the methods employed for measuring aggregates, emphasis should be placed on the futility of rigid requirements for the aggregates, both as regards quality and range of sizes, if the materials are carelessly proportioned at the mixer. If even reasonably near uniform wearing qualities are to be secured throughout the entire area of the concrete road surface, successive batches of concrete must be alike, and to insure that, the aggregates including the water in each batch of concrete must be mixed in exactly the same proportions. The aggregates are measured in various ways, all essentially alike in that the intent is to insure exactly the same amount of each ingredient for each batch of concrete. One method is to place bottomless boxes in wheelbarrows, fill the boxes level full and then lift off the box. Another is to use a wheelbarrow with a bed of such shape that the contents will be a multiple of 1 cubic foot when level full. For the larger jobs, the aggregates are hauled in industrial cars, each having sufficient capacity for a batch of concrete. The car body is provided with a partition so as to separate the fine and coarse material. The water is measured in a tank which automatically refills to the same level each time it is emptied and when adjusted for a mixture will introduce the proper amount of water for each batch. It is highly important to use the least amount of water that will produce workable concrete. =Preparation of the Earth Foundation.=--The concrete road is generally placed directly on the natural soil which has been brought to the proper cross section. Some engineers advocate that in preparing the subgrade, the earth be thoroughly rolled; others prefer not to roll the subgrade. If fills of considerable depth are constructed, they should either be rolled as built or else should be allowed to settle for some months before the concrete road is placed, preferably the latter.