We shall in this chapter, describe a variety of experiments, which are
easily made, and which may serve to illustrate the principles of
electricity in general.
EXPERIMENTS.
_The electrical Jack._
This is an invention of Dr. Franklin, and turns with considerable force,
so that it may sometimes be used for the purposes of a common jack. The
construction of it is as follows.—A slender shaft of wood passes, at
right angles, through the centre of a thin, round board, about twelve
inches in diameter, and turns upon a sharp point of iron, fixed in the
lower end; while a strong wire in the upper end passes through a hole in
a brass plate, which keeps the shaft truly vertical. About thirty radii,
of equal length, made of sash glass, cut into narrow slips, issue
horizontally from the circumference of the round board, the ends
farthest from the centre, being about four inches apart, and each
furnished with a metallic ball or thimble.
If the wire of a jar, electrified in the common way, be brought near the
circumference of the wheel, it will attract the nearest ball or thimble,
and put the wheel in motion. That ball or thimble, passing by the knob
of the jar, receives a spark from it, and being thereby electrified, is
repelled, and driven forward; while the second, being attracted,
approaches the knob, receives a spark from it, and is driven after the
first. This process is repeated till the wheel has made one revolution;
when the thimbles, before electrified, approaching the wire, instead of
being attracted are repelled, and the motion presently ceases.—But if
another jar, charged through the coating, or otherwise electrified
negatively, be placed near the same wheel, its wire will attract the
thimble or ball, repelled by the first jar, and thereby double the force
which carries round the wheel.
_The self-charging Tube._
Take a glass tube, about eighteen inches long, and an inch, or an inch
and a half, in diameter; coat the inside with tin-foil, from one
extremity of it as far as the middle; then fix a cork to the aperture of
the coated end, and let a knobbed wire pass through it, and come in
contact with the coating.
The instrument being thus prepared, hold it in one hand by the uncoated
part, and with the hand clean and dry, or with a piece of buckskin,
which has had some amalgam spread upon it, rub the outside of the coated
part; after every two or three strokes, you must remove the rubbing
hand, and by applying it to the knobbed wire, you will receive sparks
from it. By this means the coated end will gradually acquire a charge,
which may be increased to a considerable degree. Now, if you grasp the
outside of the coated end with one hand, and touch the knobbed wire with
the other, you will receive a shock.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account