In the wet work for the preparation of skins for tannage much the same general principles and methods are embodied as in the case of hides, but with appropriate modifications. As soft leathers are chiefly wanted, a mellow liming is quite the usual requirement for all skins. It is also usual to have a long liming, for some skins (like those of sheep and seal) have much natural fat which needs the saponifying influence of lime and lipolytic action of the enzymes of the lime liquors; whilst other skins (like those of goat and calf) are very close textured and need the plumping action of the lime and a certain solution of interfibrillar substance. In consequence of the long mellow liming, sulphides are not usually necessary, and indeed sodium sulphide is not usually desirable, on account of its tendency to make the grain harsh. It is used, however, for unwoolling sheepskins, in such a manner that the grain is not touched. Similarly caustic soda is seldom required, and the yield of pelt by weight is usually a small consideration. Systems of liming show some variety. The one-pit system is very common, and is less objectionable for a long mellow liming, but rounds of several pits are also used, and in some cases even more than one round. This is obviously conducive to regularity of treatment, and as the work involved in shifting the goods is much less laborious than in the case of heavy ox hides, it would seem a preferable alternative. The depilation of sheepskins involves very special methods of treatment (sweating and painting) on account of the importance and value of the wool, the quality and value of which would be impaired by putting the skins through ordinary lime liquors. The pelts, however, are limed after unwoolling.