The length of the hull, which in No. 9 was 520 feet, was increased in No. 23 to 535 feet, and the number of gasbags from seventeen to eighteen. This gave a total volume of 997,500 cubic feet compared with 890,000 cubic feet in No. 9, with a disposable lift under specification conditions of 5.7 tons as opposed to 3.8 tons. The longitudinal shape of No. 23 is a modified form of "Zahm" shape, the radius of the bow portion being twice the diameter of the parallel portion, while the stern radius is three times the same diameter. In design the hull framework is almost a repetition of No. 9, particularly in the parallel portion, the same longitudinal and transverse frames dividing the hull into compartments, with tubes completely encircling the section between each main transverse frame. The system of wiring the hull is precisely the same in both the ships, and nets are employed in the same way. The triangular section of keel is adhered to, but its functions in No. 23 are somewhat different. In No. 9 it was intended to be sufficiently strong to support all the main vertical bending moments and shearing forces, but in No. 23 it was primarily intended to support the distributed weights of water ballast, petrol tanks, etc., between the main transverse frames. Unlike No. 9, the keel is attached to the main transverse frames only. The cabin and wireless cabin are disposed in the keel in the same manner, and it also furnishes a walking way for the total length of the ship. The stabilizing fins, both vertical and horizontal, are similar to those attached to No. 9, but the system of rudders and elevators is totally different. In place of the box rudders and elevators in No. 9, single balanced rudders and elevators are attached to the fins; they have their bearing on the outboard side on the external girders of the fins, which are extended for the purpose. The elevators and rudders are composed of a duralumin framework, stiffened by a kingpost on either side with bracing wires.