Celtic art in Pagan and Christian timesAllen, J. Romilly (John Romilly)
Philosophy
Celtic art in Pagan and Christian times
Allen, J. Romilly (John Romilly)
Art, Celtic
The essential difference between the key-patterns used by the
Egyptians, Greeks, and Romans and those used by the Christian Celts
consists in the introduction of diagonal lines by the latter. Square
key-patterns (_i.e._ those of the Greek fret type) were very seldom
used in Christian Celtic art. There is, however, a very good example
on one of the crosses at Penmon, Anglesey. The first step in the
evolution of the Celtic key-pattern was to turn the Greek fret round
through an angle of 45° so as to make the lines run diagonally with
regard to the margins instead of parallel to them. Key-patterns in
this stage of development are to be seen in the Lindisfarne Gospels,
the St. Gall Gospels (Codex No. 51), and an Anglian cross-shaft from
Aberlady, Haddingtonshire, now at Carlowrie Castle, near Kirkliston,
Midlothian. It will be observed, however, that the result of changing
a square key-pattern into a diagonal one is to leave a series of
unornamented triangles all round the edge (p. 280). When these
triangles are filled in by bending the ends of the diagonal lines
round through an angle of 45°, so as to run parallel to the margins,
we get such a characteristically Celtic key-pattern as the one on the
great cross-shaft at St. Andrews, Fifeshire. Lastly, when the opposite
ends of the diagonal lines in the middle of the panel are bent round
in a similar manner, the most typical of all the Celtic key-patterns
is arrived at, of which there is a very good example on the erect
cross-slab at Farr, Sutherlandshire.
[Illustration: 1 2]
[Illustration: 3 4
Key-patterns
(1) Rosemarkie, Ross-shire
(2) Farr, Sutherlandshire
(3) Gattonside, Roxburghshire
(4) Nigg, Ross-shire
]
[Illustration: Shaft of Cross of Eiudon, at Golden Grove,
Carmarthenshire]
The filling in of the sharp corners made by the lines inclined to each
other at an angle of 45°, with small black triangles (if in a MS.)
or with sunk triangles (if on a sculptured stone) gives a decorative
finish to the pattern, and still further adds to its distinctively
Celtic character.
Next to interlaced-work the key-pattern is the most common motive
made use of in the decorative art of the Christian Celtic period.
It occurs in nearly all the Hiberno-Saxon illuminated MSS. and on a
large proportion of the sculptured monuments in Ireland, Scotland, and
Wales. Key-patterns and interlaced-work in combination, but without
any other decorative motive, may be seen on the Welsh crosses at
Carew and Nevern, Pembrokeshire; Golden Grove, Carmarthenshire; and
Llantwit Major and Margam, Glamorganshire. On the metalwork of the
period key-patterns seldom occur, except on the bronze bells, on a
strap-buckle from Islandbridge, near Dublin, and on the Crucifixion
plaque of repoussé bronze from Athlone, now in the Dublin Museum.
[Illustration: Detail of ornament on erect cross-slab at Rosemarkie,
Ross-shire]
SPIRAL ORNAMENT
[Illustration: Methods of connecting spirals]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account