If your pattern calls for an opening or placket at one side of the front, it will be appropriate to make a hem running lengthwise of the skirt as a finish at the placket, and the skirt will not be seamed with a simple seam at that place. Turn to the wrong side one inch for hem along the right front. Baste. Lap this hem over the left side. Baste flat to the left portion of front, and stitch nearly one inch from edge, to within 8 or 9 inches of the top. The placket opening on the under side of front can be bound with a two inch strip, sewing on right side at the edge and turning to wrong just at the edge. If the pattern does not allow for a hem on right front and lap finish on the right side of front, but only for a simple seam, then it will be necessary to face the right front portion with a strip 1½-inches wide. =Pin the skirt to the belting.= It is possible to turn in the skirt edge at top of belt so that it comes even with the top of the belt. This makes a slightly raised waist line. Stitch neatly at the top edge. Turn hem at the bottom the desired width and baste carefully. The stitching of the hem can be done on the right side for neater finish if the basting is done with care. Sew on hooks and eyes. Be careful to attach the hooks so that they will not show on the outside of skirt. Mollie Stark was so successful with her skirt that she made one for her older sister Ruth, and also won the prize at the County Fair contest. EXERCISES AND PROBLEMS 1. Study some of the skirt patterns which mother has at home. Compare with the one used at school. 2. What is a skirt gore? Describe. Draw on the blackboard. 3. Give some suggestions for economical cutting. LESSON 9 CLOTHING IN RELATION TO HEALTH Do you know that clothes help to keep us well? The Pleasant Valley girls learned how, and we are to study, too.