If you make all connections from a battery or dynamo just as for any complete circuit, but use the earth for one wire, the electricity will flow perfectly well (Fig. 127). To connect an electric wire with the earth, the wire must go down deep into the ground and be well packed with earth; but since water pipes go down deep and the earth is already packed around them, the most convenient way to ground a circuit is to connect the wire that should go into the ground with the water pipe. The next experiment, the grounding of a circuit, should be done by the class with the help of the teacher. [Illustration: FIG. 127. The ground can be used in place of a wire to complete the circuit.] EXPERIMENT 68. _Caution: Keep the switches turned off throughout this experiment._[6] [Footnote 6: All through this chapter it is assumed that the electrical apparatus described in the appendix is being used. In this apparatus all the switches are on one wire, the other wire being alive even when the switches are turned off.] (a) Put a piece of fuse wire across the fuse gap. Screw the plug with nails in it into the lamp socket. Connect the bare end of a piece of insulated wire to the water faucet and touch the other end to one nail of the plug. If nothing happens, touch it to the other nail instead. The electricity has gone down into the ground through the water pipe, instead of into the other wire. The ground carries the electricity back to the dynamo just as a wire would. (b) Put a new piece of fuse wire across the gap. _Keep switches turned off._ Touch the brass disk at the bottom of an electric lamp to the nail which worked, and touch the wire from the faucet to the other brass part of the lamp (Fig. 129). What happens? _Caution: Under no circumstances allow the switch to be turned on while you are doing any part of this experiment. Under no circumstances touch the wire from the faucet to the binding posts of the fuse gap. Do only as directed._ Explain what would happen if you disobeyed these rules. [Illustration: FIG. 128. Grounding the circuit. The faucet and water pipe lead the electricity to the ground.] WHY A BIRD IS NOT ELECTROCUTED WHEN IT SITS ON A LIVE WIRE. If a man accidentally touches a live wire that carries a strong current of electricity he is electrocuted; yet birds perch on such a wire in perfect safety. If a man should leap into the air and grasp a live wire, hanging from it without touching the ground, he would be no more hurt by it than a bird is. A person who is electrocuted by touching such a wire must at the same time be standing on the ground or on something connected with it. The ground completes the electric circuit which passes through the body. An electric circuit can always be completed through the ground, and when this is done, it is called _grounding a circuit_. [Illustration: FIG. 129. How the lamp and wire are held to ground the circuit.]