When the coal burns, the chief ultimate products of its combustion are carbonic acid, water, and ammoniacal products, which escape up the chimney; and a greater or less amount of residual earthy salts, which take the form of ash. These products are, to a great extent, such as would result from the burning of so much wood. These properties of coal may be made out without any very refined appliances, but the microscope reveals something more. Black and opaque as ordinary coal is, slices of it become transparent if they are cemented in Canada balsam, and rubbed down very thin, in the ordinary way of making thin sections of non-transparent bodies. But as the thin slices, made in this way, are very apt to crack and break into fragments, it is better to employ marine glue as the cementing material. By the use of this substance, slices of considerable size and of extreme thinness and transparency may be obtained.[1] [Footnote 1: My assistant in the Museum of Practical Geology, Mr. Newton, invented this excellent method of obtaining thin slices of coal.] Now let us suppose two such slices to be prepared from our lump of coal-- one parallel with the bedding, the other perpendicular to it; and let us call the one the horizontal, and the other the vertical, section. The horizontal section will present more or less rounded yellow patches and streaks, scattered irregularly through the dark brown, or blackish, ground substance; while the vertical section will exhibit mere elongated bars and granules of the same yellow materials, disposed in lines which correspond, roughly, with the general direction of the bedding of the coal.