found on the micrometer, to 3563, or the number of times the microscope magnifies the diameter of the object. By working in this manner, the magnifying power of each lens used with the compound microscope may be easily found, though the result will be different in different compound microscopes, varying, according to the combination of the lenses, their distance from the object, and one another, &c. Having discovered the magnifying power of the microscope, with the different object lenses that are used therewith, our next subject is to find out the real size of the objects themselves, and their different parts; this is easily effected, by finding how many revolutions of the micrometer-screw answer to a known measure on the sectoral scale, or other object placed on the stage; from the number thus found, a table should be constructed, expressing the value of the different revolutions of the micrometer with that object lens, by which the primary number was obtained. Similar tables must be constructed for each object lens. By a set of tables of this kind, the observer may readily find the measure of any object he is examining; for he has only to make the needle point traverse over this object, and observe the number of revolutions the screw has made in its passage, and then look into his table for the real measure which corresponds to this number of revolutions, which is the measure required. ACCOUNT OF GLASS, PEARL, &c. MICROMETERS, BY THE EDITOR. Having seen some glass, &c. micrometers with exquisite fine divisions, for the purposes of applying to microscopes and telescopes; and in accuracy, being equivalent to the micrometer just described by our author, I judge, some account of their application and uses here will be very acceptable to the curious and inquisitive reader. A particular description of these as made by the ingenious Mr. Coventry, has been already given in the Encyclopædia Britannica, Vol. XI. p. 708.