To apply this scroll for use, fix the body of the microscope to the top thereof by the screw, A, as in Fig. 2, by screwing it in the same hole as the ivory handle was applied to before. The brass or ivory slider being fixed as before described, and the microscope placed in a perpendicular position, move the mirror, D, in such a manner as to reflect the light of the sky, of the sun, or a candle, directly upwards through the microscope; by which means the object will be most conveniently viewed. It is further useful for viewing opake objects, by screwing the arm, Q R, Fig. 1, into the body of the microscope at G; then screwing into the round hole, R, that magnifier which you think will best suit your object, and putting the concave speculum, S, on the outside of the ring, R, you will observe in the body of the microscope, between the wood or brass, F, and the end of the male screw, C C, a small hole, _u_, through which slides the long wire, T, which has a point at one end, and forceps at the other, that may be used occasionally as your objects require. When you have fixed this, and your object on it, turn the arm, R, till the magnifier is brought over the object; it may be then adjusted to the true focus, by turning the screw, as before. It must also be brought exactly over the speculum, by turning the upper part of the scroll to one side, till your object and the two specula are in one line, as will be found by trial; and then fix it by the screw, B, at which time the upper surface of the object will be enlightened by the light reflected from the mirror, D, to the concave speculum. DESCRIPTION OF A SMALL MICROSCOPE FOR OPAKE OBJECTS. Plate II. B. Fig. 3 and 4. A, Fig. 3, is a fixed arm, through which passes a screw, B, the other end is fastened to the moveable arm, C. D, a nut fitted to the said screw, which, when turned, will either separate or bring together the two arms, A C. E, a steel spring, that separates the two sides when the nut is unscrewed. F, a piece of brass turning round in a spring socket, moving on a rivet, in which moves a steel wire pointed at the end G, and the other end a pair of pliers, H: these are either to thrust into, or take up and hold any object, and may be turned round as required. I, a ring of brass, with a female screw fixed on an upright piece of the same metal, turning on a rivet, that it may be set at a due distance when the least magnifiers are used, and is adapted to the screws of all the magnifiers.