The first attempts to produce an electric drill with a reciprocating motion were so unsuccessful that inventors turned their attention to perfecting some rotary device. This proved more successful, and rotary drills, operating long augers and acting like ordinary wood-boring machines, are now used extensively for certain kinds of drilling. The more recent forms perform the same amount of work as the air drill, with a consumption of about one-tenth the power. Moreover, none of the energy is lost at high altitudes as in the case of air drills, and they are not affected by low temperatures which sometimes render the air drill inoperable. On the other hand, the air drill is a hardy implement, capable of withstanding very rough usage, whereas the electric drill is probably the more economical, as well as the more convenient drill of the two. In certain kinds of mining, such as in the potash mines of Europe and the coal mines of America, these electric drills operating their long augers have been found particularly useful. The ordinary type of drill is so arranged that it can be operated at any angle, vertically or horizontally. The lighter forms are mounted on upright stands, with screws at the ends for fastening to the floor and roof, although the heavier types are sometimes mounted on trucks. The motor, which is not much larger or heavier than an ordinary fan motor, is fastened to the upright and is from four to six horse-power. This connects with a flexible wire which transmits the power from the generating station, frequently several miles away. The auger, which is about the largest part of the machine and entirely out of proportion to the little motor that drives it, is simply a long bar of steel, twisted spirally at the cutting-end like an ordinary wood auger. From the workman's standpoint these rotary drills are infinitely superior to reciprocating or percussion drills, where the constant jarring of the machine, besides being extremely tiresome, sometimes produces the serious disease known as neuritis. Various means have been attempted to prevent this, such as by overcoming the jar in a measure by flexible levers which do not transmit the vibrations to the hands and arms; but such attempts are only partially successful, and a certain amount of jarring cannot be avoided. In the rotary electric drills there is none of this, the workmen simply controlling the drill and the motor with levers, and receiving at most only a slight jar from the vibrations of the auger. TRACTION IN MINING