Chrome steel, for example, in the form of projectiles, is the most dreaded enemy of nickel-steel armor plates, because of the hardness and elasticity of armor-piercing projectiles made of it. Such a steel contains about two per cent. of chromium with about one or two per cent. of carbon, which when suddenly cooled is extremely hard and tough. This kind of steel and manganese steel are the best guards against the burglar and safe-blower, as they resist even very highly tempered and hardened drills. As this steel is relatively cheap to manufacture, it is frequently used in the construction of safes and burglar-proof gratings. For this purpose, however, it is sometimes combined in alternate layers with soft wrought iron, the steel resisting the point of the drill, while the iron furnishes the necessary elasticity to resist the blows of the sledge. The bars used in modern jails and prisons are often made in a similar manner of alternate sheaths of iron and chrome steel. Against the time-honored "hack-saw," the bugbear of prison officials for generations, such bars an inch and a quarter in diameter offer an almost insurmountable obstacle; and they are equally effective against a heavy sledge hammer. At least one case is recorded in which the use of these "composite" bars resulted in a disastrous fire in a prison. A small blaze having started in the basement of this prison, attempts to reach it with a stream of water were defeated by the bars of the steel gratings at the windows, which would not admit the nozzle of the hose. A corps of men armed with hack-saws, crow-bars, and sledges attacked this grating, which, if made of ordinary steel, could have been readily broken. But against these composite bars they produced no appreciable effect. Meanwhile the fire gained rapidly, threatening the building and its eight hundred inmates, and was only checked after holes had been made through fire-proof floors and ceilings for admitting the nozzle.