Another important improvement was made by a connection from the beam to the cocks or valves, so that the engine worked automatically, whereas in the first place it had been necessary to have a boy or man operate the valves,--a most awkward arrangement, in the light of modern improvements. As the story is told, the duty of opening and closing the regulating and condensing valves was intrusted to boys called cock boys. It is said that one of these boys named Humphrey Potter "wishing to join his comrades at play without exposing himself to the consequences of suspending the performance of the engine, contrived, by attaching strings of proper length to the levers which governed the two cocks, to connect them with the beam, so that it should open and close the cocks as it moved up and down with the most perfect regularity." This story has passed current for almost two centuries, and it has been used to point many a useful moral. It seems almost a pity to disturb so interesting a tradition, yet it must have occurred to more than one iconoclast that the tale is almost too good to be true. And somewhat recently it has been more than hinted that Desaguliers, with whom the story originated, drew upon his imagination for it. A print is in existence, made so long ago as 1719, representing an engine erected by Newcomen at Dudley Castle, Staffordshire, in 1712, in which an automatic valve gear is clearly shown, proving that the Newcomen engine was worked automatically at this early period. That the admirable story of the inventive youth, whose wits gave him leisure for play, may not be altogether discredited, however, it should be added that unquestionably some of the early engines had a hand-moved gear, and that at least one such was still working in England after the middle of the nineteenth century. It seems probable, then, that the very first engines were without the automatic valve gear, and there is no inherent reason why a quick-witted youth may not have been the first to discover and remedy the defect. According to the Report of the Department of Science and Arts of the South Kensington Museum: "The adoption of Newcomen's engine was rapid, for, commencing in 1711 with the engine at Wolverhampton, of twenty-three inch diameter and six foot stroke, they were in common use in English collieries in 1725; and Smeaton found in 1767 that, in the neighborhood of Newcastle alone there were fifty-seven at work, ranging in size from twenty-eight inch to seventy-five inch cylinder diameter, and giving collectively about twelve hundred horse-power. As Newcomen obtained an evaporation of nearly eight pounds of water per pound of coal, the increase of boiler efficiency since his time has necessarily been but slight, although in other requisites of the steam generator great improvements are noticeable." [Illustration: A MODEL OF THE NEWCOMEN ENGINE.