196. Why the Water Supply is not uniform in All Parts of the City.
In the preceding Section, we saw that the flow from a faucet depends
upon the height of the reserve water above the tap. Houses on a level
with the main supply pipes (Figs. 148 and 151) have a strong flow
because the water is under the pressure of a column _A_; houses
situated on elevation _B_ have less flow, because the water is under
the pressure of a shorter column _B_; and houses at a considerable
elevation _C_ have a less rapid flow corresponding to the diminished
depth _(C)_.
Not only does the flow vary with the elevation of the house, but it
varies with the location of the faucet within the house. Unless the
reservoir is very high, or the pumps very powerful, the flow on the
upper floors is noticeably less than that in the cellar, and in the
upper stories of some high building the flow is scarcely more than a
feeble trickle.
[Illustration: FIG. 151.--Water pressure varies in different parts of
a water system.]
When the respective flows at _A_, _B_, and _C_ (Fig. 151) are measured,
they are found to be far lower than the pressures which columns of
water of the heights _A_, _B_, and _C_ have been shown by actual
demonstration to exert. This is because water, in flowing from place
to place, expends force in overcoming the friction of the pipes and
the resistance of the air. The greater the distance traversed by the
water in its journey from reservoir to faucet, the greater the waste
force and the less the final flow.
In practice, large mains lead from the reservoir to the city, smaller
mains convey the water to the various sections of the city, and
service pipes lead to the individual house taps. During this long
journey, considerable force is expended against friction, and hence
the flow at a distance from the reservoir falls to but a fraction of
its original strength. For this reason, buildings situated near the
main supply have a much stronger flow (Fig. 152) than those on the
same level but remote from the supply. Artificial reservoirs are
usually constructed on the near outskirts of a town in order that the
frictional force lost in transmission may be reduced to a minimum.
[Illustration: FIG. 152.--The more distant the fountain, the weaker
the flow.]
In the case of a natural reservoir, such as an elevated lake or
stream, the distance cannot be planned or controlled. New York, for
example, will secure an abundance of pure water from the Catskill
Mountains, but it will lose force in transmission. Los Angeles is
undertaking one of the greatest municipal projects of the day. Huge
aqueducts are being built which will convey pure mountain water a
distance of 250 miles, and in quantities sufficient to supply two
million people. According to calculations, the force of the water will
be so great that pumps will not be needed.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account