We commence at the bottom, and with the central square. A length of wire, measuring twelve or fourteen inches, must be taken, and the small shells used. Thread four shells on the wire, arranging them so that the point of the first meets the point of the second, and the end of the second meets the end of the third; while the point of the third meets the point of the fourth. Push them along the wire to within about an inch of the end, then bend them into a square, and twist the short end of the wire firmly and neatly with the other, and cut off the superfluous bit. Now thread three shells on the wire, so arranged that the end of the first and the point of the third shall meet the corresponding end and point of that shell of the square already formed, which, when these three are bent into their positions, will constitute the fourth side of this second square. Loop the wire through the corner of the foundation square, and we have the second completed. A certain firmness, divested, however, of tightness, is requisite in performing these manipulations; for, if the shells are jammed too closely together, the work will have an uneven, stiff appearance, whereas, if they are left too loose, the fabric will never set in form, and will look slovenly. The drawing the wire through the corners of the preceding squares, in order to complete the one which is being worked, too, is a nice operation, which must be gently done, or we may crack the work; and securely and neatly managed, or the squares will not be firm and compact. Three shells are now again to be symmetrically threaded, and formed into a square, and fastened down to the central one. Two other squares are then to be formed in like manner, and we now have five, or one on each of the four sides of the foundation square. All the sixteen shells used for this should be small, and as nearly as possible of a size. The wire is now passed up through the inside of the shell nearest to it, and it will be found that the next round of squares will be formed, first, by threading two shells, and bending them into position, and fastening them down at the corner, over the place where the preceding round has left us two sides of a square, and then by threading three shells, and bringing them into shape, where we have only one side ready for us. The two shells, and the three shells, used alternately, will produce another round, consisting of eight squares. Care must be taken to use shells of equal size for a round, although in each fresh round the size of the shells should be in a slight degree increased. The backs of the shells must all lie one way, and the openings the other; the latter constitutes the inside of the basket, as they do not look so uniform and handsome. The following engraving will give an idea of the appearance of the fabric in an early stage. [Illustration]