History of merchant shipping and ancient commerce, Volume 1 (of 4)Lindsay, W. S. (William Schaw)
History
History of merchant shipping and ancient commerce, Volume 1 (of 4)
Lindsay, W. S. (William Schaw)
Commerce -- History; Shipping -- History; Steam navigation -- History
Like the other boats of the Nile, this vessel has only one sail, but
the mast appears to have been composed of two spars of similar size,
secured by backstays to her after-part. It is not easy to understand
why two spars should have been used; but it is possible that by these
means a large and heavy sail might in stormy weather be lowered on
either side, according to the direction of the wind; this, however,
would require some mechanical contrivance not indicated. If the yard
was a fixture aloft, moving on a pivot, the sail may have been triced
up and furled to it: the cross bars, at the top of the masts, serving
to enable the sailors more easily to furl the sail, tend to confirm
this supposition. Although such a mode of furling the sail would be
inconvenient and full of risk, if the ship were exposed to heavy seas,
it would answer very well for barges on the Nile, as the yard and
sail, when furled, would be entirely clear of the cargo while loading
or unloading. It has been supposed that the sail, in this vessel, was
made of papyrus, as noticed by Herodotus; but it may be doubted whether
papyrus could be manufactured into a material sufficiently tough to
form a large sail. The braces are apparently worked by a man seated in
the stern.
[Sidenote: Steering.]
The mode of steering here depicted is different from that usually seen
on the monuments, for, instead of a single oar, passing through the
stern frames, or one on each quarter, there are, in this instance,
three on the same quarter; and how this was managed it is not easy to
discern. Nor does the drawing show the mode in which the propelling
oars were triced up when not in use.
Tacitus[165] speaks of Germanic tribes who used a rudder at each end;
but the practice was not general, and none of the Egyptian boats or
barges were thus fitted, or had more than one sail, in these respects
resembling the earliest of the Greek vessels. Sometimes a single
rudder, instead of working in a rowlock, or in a porthole through the
stern, was applied outside, merely over the stern-rail, and held in its
place by a stout thong. This imperfect mode of steering was, however,
confined to the rudest river craft, and of these we have a model in the
museum at Berlin, as well as a painting at Thebes. The Berlin model
shows also the position of the rowers, the arrangements of the mast,
yard, and rigging, the place of the pegs and mallet, for fastening the
vessel to the shore, and the landing planks, which were always kept in
readiness at the bow, in charge of the man stationed there, to fathom
and report the depth of the water. This boat is decked, the cabins
occupying only a portion of the middle, like the pleasure vessels of
the Nile, or the passage-boats at Diarbekr. But in most of the larger
boats the cabin resembled our “round house,” extending from one side
to the other, and was often sufficiently spacious to contain cattle,
horses, and general stores.
[Sidenote: Passage and cargo boats.]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account