Lay a piece of tracing-paper over the design to be copied and trace the outlines very carefully with a hard lead-pencil. Then have your china perfectly clean and dry, and give it a wash all over with a clean cotton cloth wet with clear turpentine. Place a piece of red transfer-paper on the china, and having determined exactly where you wish the design, lay the tracing-paper over the transfer-paper on the space for decoration. Use bits of gummed paper on the corners of the transfer- and tracing-paper to hold them in place, and carefully go over the lines with a lead-pencil, remove the papers, and the design will be clearly outlined on the ware. Now rub a little India-ink on a common individual butter-plate of white china, and using a fine brush, very carefully paint over the red marks with the India-ink, making your lines as distinct and delicate as possible. When this is finished, again wash the china with turpentine to remove any of the red coloring which may be apparent on its surface. Thus prepared the design can be painted, or the china may first be tinted and allowed to dry, when the outlines will be plainly visible through the tinting, and the color can be removed from the design with tar paste. Use the scraper to take the grounding off of minute spaces. For those skilled in drawing it will not be necessary to trace the design, as it can readily be sketched on the china with a lead-pencil after the ware has first received a coat of turpentine, and when tinted the decoration can be drawn on after the grounding has thoroughly dried, and the color may be removed as before. =Mottled Grounds.= Prepare the paint as for tinting, only make it more moist, and dab it lightly over the china by means of a piece of cotton cloth on the end of your finger; this will give the china a mottled appearance which in some cases is preferred to the plain grounding. =Snow Landscape.= We will take for example Fig. 184. [Illustration: _Fig. 184_]