Industrial Biography: Iron Workers and Tool MakersSmiles, Samuel
History
Industrial Biography: Iron Workers and Tool Makers
Smiles, Samuel
Industrial arts -- Biography; Iron industry and trade -- Great Britain -- Biography
[7] In this, as in other methods of employing power, the moderns had
been anticipated by the ancients; and though hydraulic machinery is a
comparatively recent invention in England, it had long been in use
abroad. Thus we find in Dr. Bright's Travels in Lower Hungary a full
description of the powerful hydraulic machinery invented by M. Holl,
Chief Engineer of the Imperial Mines, which had been in use since the
year 1749, in pumping water from a depth of 1800 feet, from the silver
and gold mines of Schemnitz and Kremnitz. A head of water was
collected by forming a reservoir along the mountain side, from which it
was conducted through water-tight cast-iron pipes erected
perpendicularly in the mine-shaft. About forty-five fathoms down, the
water descending through the pipe was forced by the weight of the
column above it into the bottom of a perpendicular cylinder, in which
it raised a water-tight piston. When forced up to a given point a
self-acting stop-cock shut off the pressure of the descending column,
while a self-acting valve enabled the water contained in the cylinder
to be discharged, on which the piston again descended, and the process
was repeated like the successive strokes of a steam-engine. Pump-rods
were attached to this hydraulic apparatus, which were carried to the
bottom of the shaft, and each worked a pump at different levels,
raising the water stage by stage to the level of the main adit. The
pumps of these three several stages each raised 1790 cubic feet of
water from a depth of 600 feet in the hour. The regular working of the
machinery was aided by the employment of a balance-beam connected by a
chain with the head of the large piston and pump-rods; and the whole of
these powerful machines by means of three of which as much as 789,840
gallons of water were pumped out of the mines every 24 hours--were set
in operation and regulated merely by the turning of a stopcock. It
will be observed that the arrangement thus briefly described was
equally applicable to the working of machinery of all kinds, cranes,
&c., as well as pumps; and it will be noted that, notwithstanding the
ingenuity of Bramah, Armstrong, and other eminent English mechanics,
the Austrian engineer Holl was thus decidedly beforehand with them in
the practical application of the principles of hydrostatics.
[8] Dr. Brown published a brief memoir of his friend in the New Monthly
Magazine for April, 1815, which has been the foundation of all the
notices of Bramah's life that have heretofore appeared.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account