My reflector in my present instrument is, I am a little ashamed to confess, nothing better than a piece of looking-glass fixed to an axle within the camera, near its top left-hand edge. One end of the axle protrudes, and has a short arm; when I push the arm back, the mirror is raised; when I push it forward it drops down. I used a swing-glass because the swing action is very true, and as my apparatus was merely a provisional working model made of soft wood, I did not like to use sliding arrangements which might not have acted truly, or I should certainly have employed a slide with a rectangular glass prism, on account of the perfect reflection it affords. And let me say, that a prism of 2 inches square in the side is quite large enough for adjustment purposes, for it is only the face of the portrait that is wanted to be seen. I chose my looking-glass carefully, and selected a piece that was plane and parallel. It has not too high a polish, and therefore does not give troublesome double reflections. In fact, it answers very respectably, especially when we consider that perfection of definition is thrown away on composites. I thought of a mirror silvered on the front of the glass, but this would soon tarnish in the gaslight, so I did not try it. For safety against the admission of light unintentionally, I have a cap to the focusing-screen in the roof, and a slide in the fixed body of the instrument immediately behind the reflector and before the dark slide. Neither of these would be wanted if the reflector was replaced by a prism, set into one end of a sliding block that had a large horizontal hole at the other end, and a sufficient length of solid wood between the two to block out the passage of light both upwards and downwards whenever the block is passing through the half-way position.