First, to the preparation of the clay.--In ancient Egypt, in places where water abounded, it appears that the clay was lifted from the bottoms of ponds and lakes on the end of poles, was formed into bricks, then sun-dried, modernly called _adobes_. The clay for making these required a stiffening material. For this straw was used, mixed with the clay; and stubble was also used in the different courses. Hence the old metaphor of worthlessness of “bricks without straw,” but of course in burning, and in modern processes of pressing unburnt bricks, straw is no longer used. Sand should abound in the clay in a certain proportion, or be mixed therewith, otherwise the clay, whether burned or unburned, will crumble. Stones, gravel and sticks must be removed, otherwise the contraction of the clay and expansion of the stones on burning, produce a weak and crumbling structure. Brick clay generally is coloured by the oxide of iron, and in proportion as this abounds the burned brick is of a lighter or a deeper red. It may be desired to add colouring matter or mix different forms of clay, or add sand or other ingredients. Clay treated by hand was for ages kneaded as dough is kneaded, by the hand or feet, and the clay was often long subjected, sometimes for years, to exposure to the air, frost and sun to disintegrate and ripen it. As the clay must be first disintegrated, ground or pulverised, as grain is first ground to flour to make and mould the bread, so the use of a grinding mill was long ago suggested. The first machine used to do all this work goes by the humble name of _pug mill_. Many ages ago the Chilians of South America hung two ponderous solid wood or stone wheels on an axis turned by a vertical shaft and operated by animal power; the wheels were made to run round on a deep basin in which ores, or stones, or grain were placed to be crushed. This Chilian mill, in principle, was adopted a century or so ago in Europe to the grinding of clay. The pug mill has assumed many different forms in this age; and separate preliminary mills, consisting of rollers of different forms for grinding, alone are often used before the mixing operation. In one modern form the pug mill consists of an inverted conical-shaped cylinder provided with a set of interior revolving blades arranged horizontally, and below this a spiral arrangement of blades on a vertical axis, by which the clay is thoroughly cut up and crushed against the surrounding walls of the mill, in the meantime softened with water or steam if desired, and mixed with sand if necessary, and when thus ground and tempered is finally pressed down through the lower opening of the cylinder and directly into suitable brick moulds beneath.