for certain newly improved methods of constructing furnaces or fire-places for heating, boiling, or evaporating of water and other liquids which are applicable to steam engines and other purposes, and also for heating, melting, and smelting of metals and their ores, whereby greater effects are produced from the fuel, and the smoke is in a great measure prevented or consumed. The principle, "an old one of my own," as Watt says, is in great part acted upon to-day. So numerous were the improvements made by Watt at various periods, which greatly increased the utility of his engine, it would be in vain to attempt a detailed recital of his endless contrivances, but we may mention as highly important, the throttle-valve, the governor, the steam-gauge and the indicator. Muirhead says: The throttle-valve is worked directly by the engineer to start or stop the engine, and also to regulate the supply of steam. Watt describes it as a circular plate of metal, having a spindle fixed across its diameter, the plate being accurately fitted to an aperture in a metal ring of some thickness, through the edgeway of which the spindle is fitted steam-tight, and the ring fixed between the two flanches of the joint of the steam-pipe which is next to the cylinder. One end of the spindle, which has a square upon it, comes through the ring, and has a spanner fixed upon it, by which it can be turned in either direction. When the valve is parallel to the outsides of the ring, it shuts the opening nearly perfectly; but when its plane lies at an angle to the ring, it admits more or less steam according to the degree it has opened; consequently the piston is acted upon with more or less force. Papin preferred gunpowder as a safer source of power than steam, but that was before it had been automatically regulated by the "Governor." The governor has always been the writer's favorite invention, probably because it was the first he fully understood. It is an application of the centrifugal principle adapted and mechanically improved. Two heavy revolving balls swing round an upright rod. The faster the rod revolves the farther from it the balls swing out. The slower it turns the closer the balls fall toward it. By proper attachments the valve openings admitting steam are widened or narrowed accordingly. Thus the higher speed of the engine, the less steam admitted, the slower the speed the more steam admitted. Hence any uniform speed desired can be maintained: should the engine be called upon to perform greater service at one moment than another, as in the case of steel rolling mills, speed being checked when the piece of steel enters the rolls, immediately the valves widen, more steam rushes into the engine, and _vice versa_. Until the governor came regular motion was impossible--steam was an unruly steed. Arago describes the steam-gauge thus: