"I have offered to deposit 1000_l._ to 500_l._ as a bet against
Woolf's best engine, and give him twenty millions, but that party
refuses to accept the challenge. I have no doubt but that by the time
she is in fork she will do 100 millions, which is the general opinion
here. The boilers are certainly the best ever invented, as well as
the other parts. The draught is the best you ever saw; I have only
one-quarter part of the fire-bars uncovered, yet from one-quarter
part of the fire-place that I first made, I find plenty of steam.
The greatest part of the waste steam is condensed in heating the
water to fill the boiler; what escapes is a mere nothing. The engine
will be loaded, when in fork, about 52 lbs. to the inch. Now suppose
I raise the steam so high at the first part of the stroke as to go
so expansive as to leave the steam, at the finish, only atmosphere
strong, shall I, in that case, use any more coal than at present? The
materials and joints will stand far more than that pressure; 500 lbs.
to the inch would not injure them. When the engine gets on two lifts,
I will write to you again, and in the meantime please to give me your
thoughts on the engine. Every engine that was erecting is stopped, and
the whole county thinks of no other engine.
"Your very obedient servant,
"RD. TREVITHICK."
The new pole puffer-engine worked so satisfactorily and its movements
were so manageable that the length of the stroke was increased by the
spare 6 inches, which had been allowed as a margin in case of its
overrunning its intended stroke. It would bear being worked at eighteen
strokes a minute, while the Watt 72-inch engine did not exceed nine
strokes a minute; with steam in the boiler of 80 lbs. to the inch it
performed its work when the steam supply was cut off at two-thirds of
the stroke, completing it by expansion. It also worked well with steam
of 120 lbs. to the inch; but the want of strength in the pump-rods and
the requirements of the mine caused the regular working pressure of
steam to be reduced to 60 lbs. on the inch, and to be cut off when the
pole had moved through the first quarter of its stroke. The excellent
draught causing the fire-bars to be reduced to one-quarter of their
original surface, and the heating the feed-water by the waste steam
in this powerful pumping engine, indicate the use of the blast-pipe
as at that time worked in the Welsh puddling-mill engine. Watt's
engine was for a moment forgotten, that he might challenge Woolf to a
trial, giving him as a help twenty millions, or the understood duty
of the Watt engine. This non-condensing pole-engine, with 20 tons of
pump-rods, moved at a maximum speed of 8 feet a second, and was equal
to its work with a steam pressure of 52 lbs. on the inch. Trevithick
contemplated extending the expansive principle even further than he
had done in the Wheal Prosper pole condensing engine, so that at the
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account